show environment temperature

Syntax

show environment temperature [detail] [vsf | vsx-peer]

Description

Shows the temperature information from sensors in the switch that affect fan control.

Command context

Operator (>) or Manager (#)

Parameters

detail

Shows detailed information from each temperature sensor.

vsf

Shows output from the VSF member-id on switches that support VSF.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Usage

Temperatures are shown in Celsius.

Valid values for status are the following:

normal

Sensor is within nominal temperature range.

min

Lowest temperature from this sensor.

max

Highest temperature from this sensor.

low_critical

Lowest threshold temperature for this sensor.

critical

Highest threshold temperature for this sensor.

fault

Fault event for this sensor.

emergency

Over temperature event for this sensor.

Examples

Showing detailed temperature information for a 6200 switch: 
switch# show environment temperature
Temperature information
------------------------------------------------------------------------------
                                                     Current
Mbr/Slot-Sensor                 Module Type        temperature  Status
------------------------------------------------------------------------------
1/1-PHY-01-08                   line-card-module     51.00 C    normal
1/1-PHY-09-16                   line-card-module     48.00 C    normal
1/1-PHY-17-24                   line-card-module     50.00 C    normal
1/1-PHY-25-32                   line-card-module     52.00 C    normal
1/1-PHY-33-40                   line-card-module     53.00 C    normal
1/1-PHY-41-48                   line-card-module     54.00 C    normal
1/1-Switch-ASIC-Internal        line-card-module     63.25 C    normal

1/1-CPU                         management-module    47.56 C    normal
1/1-CPU-Zone-0                  management-module    46.00 C    normal
1/1-CPU-Zone-1                  management-module    46.00 C    normal
1/1-CPU-Zone-2                  management-module    46.00 C    normal
1/1-CPU-Zone-3                  management-module    47.00 C    normal
1/1-CPU-Zone-4                  management-module    47.00 C    normal
1/1-DDR                         management-module    37.75 C    normal
1/1-DDR-Inlet                   management-module    30.69 C    normal
1/1-Inlet-Air                   management-module    22.00 C    normal
1/1-Switch-ASIC-Remote          management-module    64.06 C    normal