show environment temperature

Description

Shows the temperature information from sensors in the switch that affect fan control.

Command context

Operator (>) or Manager (#)

Parameters

detail

Shows detailed information from each temperature sensor.

vsf

Shows output from the VSF member-id on switches that support VSF.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Usage

Temperatures are shown in Celsius.

Valid values for status are the following:

normal

Sensor is within nominal temperature range.

min

Lowest temperature from this sensor.

max

Highest temperature from this sensor.

low_critical

Lowest threshold temperature for this sensor.

critical

Highest threshold temperature for this sensor.

fault

Fault event for this sensor.

emergency

Over temperature event for this sensor.

Examples

Showing current temperature information for a 6300 switch:

switch# show environment temperature
Temperature information
------------------------------------------------------------------------------
                                                     Current
Mbr/Slot-Sensor                 Module Type        temperature  Status
------------------------------------------------------------------------------
1/1-PHY-01-04                   line-card-module     45.00 C    normal
1/1-PHY-05-08                   line-card-module     45.00 C    normal
1/1-PHY-09-12                   line-card-module     46.00 C    normal
1/1-PHY-13-16                   line-card-module     47.00 C    normal
1/1-PHY-17-20                   line-card-module     47.00 C    normal
1/1-PHY-21-24                   line-card-module     50.00 C    normal
1/1-PHY-25-28                   line-card-module     45.00 C    normal
1/1-PHY-29-32                   line-card-module     47.00 C    normal
1/1-PHY-33-36                   line-card-module     48.00 C    normal
1/1-PHY-37-40                   line-card-module     47.00 C    normal
1/1-PHY-41-44                   line-card-module     48.00 C    normal
1/1-PHY-45-48                   line-card-module     49.00 C    normal
1/1-Switch-ASIC-Internal        line-card-module     56.25 C    normal

1/1-CPU-Zone-0                  management-module    50.00 C    normal
1/1-CPU-Zone-1                  management-module    50.00 C    normal
1/1-CPU-Zone-2                  management-module    50.00 C    normal
1/1-CPU-Zone-3                  management-module    51.00 C    normal
1/1-CPU-Zone-4                  management-module    51.00 C    normal
1/1-CPU-diode                   management-module    53.12 C    normal
1/1-DDR                         management-module    45.25 C    normal
1/1-Inlet-Air                   management-module    24.88 C    normal
1/1-MB-IBC                      management-module    45.62 C    normal
1/1-Switch-ASIC-diode           management-module    58.06 C    normal

Showing detailed temperature information for a 6300 switch:

switch# show environment temperature detail
Detailed temperature information
----------------------------------------------------------------
Mbr/Slot-Sensor      : 1/1-PHY-01-04
Module Type          : line-card-module
Module Description   : JL659A 6300M 48SR5 CL6 PoE 4SFP56 Swch
Status               : normal
Fan-state            : normal
Current temperature  : 45.00 C
Minimum temperature  : 41.00 C
Maximum temperature  : 50.00 C

Mbr/Slot-Sensor      : 1/1-PHY-05-08
Module Type          : line-card-module
Module Description   : JL659A 6300M 48SR5 CL6 PoE 4SFP56 Swch
Status               : normal
Fan-state            : normal
Current temperature  : 45.00 C
Minimum temperature  : 41.00 C
Maximum temperature  : 50.00 C

...