show copp-policy
Syntax
show copp-policy [<NAME> | default] [commands] [configuration] [vsx-peer]
Description
Shows CoPP policy settings for a specific CoPP policy. When entered without specifying either a name or the
default
parameter, shows all the CoPP policy settings that are active on the switch and have successfully been programmed into the hardware.
A warning is displayed if:
The active and user-specified applications of a policy do not match.
The active and user-specified configurations of a policy do not match.
Command context
Operator (>
) or Manager (#
)
Parameters
<NAME>
Specifies the name of the policy for which to display settings. Length: 1 to 64 characters.
default
Displays CoPP settings for the default policy.
commands
Displays output as CLI commands.
configuration
Displays user-specified CoPP settings and not the active settings.
[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Example
Displaying the CoPP policies defined in the configuration and the active application:
switch# show copp-policy applied copp_policy_name ------- ---------------- My_CoppPolicy applied default switch#
Displaying the active configuration of all CoPP policies as CLI commands:
Entering the config-copp context and modify the default policy: