show copp-policy factory-default
Syntax
show copp-policy factory-default [commands] [vsx-peer]
Description
Display the configuration for the factory-default CoPP policy.
Command context
Operator (>
) or Manager (#
)
Parameters
commands
Displays output as CLI commands.
[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Example
Displaying the factory-default policy:
Displaying the active configuration of My_CoppPolicy (My_CoppPolicy is applied):
Displaying the active configuration of My_CoppPolicy as CLI commands:
switch# show copp-policy My_CoppPolicy commands copp-policy My_CoppPolicy class bgp-ipv4 priority 6 rate 5000 burst 60 class ospf-multicast priority 2 rate 2000 default-class priority 1 rate 6000 burst 70
Displaying the user-specified configuration of My_CoppPolicy:
Displaying the user-specified configuration of My_CoppPolicy as CLI commands:
switch# show copp-policy My_CoppPolicy commands configuration copp-policy My_CoppPolicy class bgp-ipv4 priority 6 rate 5000 burst 60 class ospf-multicast priority 2 rate 2000 default-class priority 1 rate 6000 burst 70