show copp-policy statistics
Syntax
show copp-policy statistics [class <CLASS> | default-class] [vsx-peer]
Description
Displays statistics for all classes, or a single class, in the active CoPP policy.
Command context
Operator (>
) or Manager (#
)
Parameters
<CLASS>
Specifies the class for which to display statistics.
default-class
Displays statistics for the default class.
[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Examples
Displaying statistics for all classes in the active policy:
The rate displayed is the actual rate in hardware.
switch# show copp-policy statistics Statistics for CoPP policy 'default': Totals: bytes passed : 170000 bytes dropped : 104000 packets passed : 32000 packets dropped : 18000 Class: arp-broadcast bytes passed : 40000 bytes dropped : 40000 packets passed : 8000 packets dropped : 8000 Class: arp-unicast bytes passed : 8000 bytes dropped : 64000 packets passed : 1000 packets dropped : 10000 Class: bgp-ipv4 bytes passed : 12000 bytes dropped : 64000 packets passed : 5000 packets dropped : 10000 ... Class: default bytes passed : 20000 bytes dropped : 15000 packets passed : 1000 packets dropped : 1100 ...
Displaying statistics for the default class in the active policy:
Displaying statistics for the class bgp-ipv4 in the actively applied policy: