AOS-CX 10.07 Diagnostics and Supportability Help Center
Service OS CLI login
Description
If the user enters 0 at the boot menu prompt, they will be presented with a Service OS CLI login prompt. The user must enter the login account "admin" to log in. By default, Service OS does not require a password.
To reboot without logging in, enter reboot as the login user name.
There are two additional login accounts that execute a command without requiring a password: reboot and zeroize. Enter the login account reboot to reboot the management module and zeroize to initiate a zeroization process. The zeroize user account helps a user reset the admin user account's password.
Example
ServiceOS GT.01.01.0001 switch ttyS0
To reboot without logging in, enter 'reboot' as the login user name.
switch login: admin
Hewlett Packard
Enterprise
SVOS>
```
```
ServiceOS GT.01.01.0001 switch ttyS0
To reboot without logging in, enter 'reboot' as the login user name.
switch login: reboot
Hewlett Packard
Enterprise
reboot: Restarting system
```
```
ServiceOS login: zeroize
This will securely erase all customer data, including passwords, and
reset the switch to factory defaults.
This action requires proof of physical access via a USB drive.
* Create a FAT32 formatted USB drive
* Create a file in the root directory of the USB drive named zeroize.txt
* Type the following serial number into the zeroize.txt file: 772632X1830018
* Insert the USB drive into the target module
* Confirm the following prompt to continue
Continue (y/n)? y
############################WARNING############################
This will securely erase all customer data and reset the switch
to factory defaults. This will initiate a reboot and render the
switch unavailable until the zeroization is complete.
This should take several minutes to one hour to complete.
############################WARNING############################
Continue (y/n)? y
reboot: Restarting system