ACL Events

The following are the events related to ACL.

Event ID: 43 (Severity: Warning)

Message	unable to apply <ACL_NAME> to vlan <VLAN_ID>- failed to add entry <ENTRY_ID> to port <LPORT>
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error applying the ACL due to lack of hardware resources.

Event ID: 44 (Severity: Warning)

Message	Unable to add ACL entry to vlan <VLAN_ID>- not enough hw resources on port <LPORT>
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error attempting to add an entry to an ACL that has already been applied to a VLAN.

Event ID: 45 (Severity: Warning)

Message	Unable to add port to vlan <VLAN_ID>- not enough hw resources on port <LPORT>
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error attempting to add a port to a VLAN that has an ACL applied.

Event ID: 46 (Severity: Warning)

Message	Unable to add port to vlan <VLAN_ID>- GVRP is enabled
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error attempting to apply the ACL to a VLAN because GVRP is enabled.

Event ID: 47 (Severity: Warning)

Message	Unable to add port <LPORT> to trunk- ACL is configured on vlan <VLAN_ID>
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error attempting to add a port to a dynamic trunk. Dynamic trunks are not allowed to be configured on ports with ACLs applied.

Event ID: 48 (Severity: Warning)

Message	Unable to apply ACL or Policy NAME to port <LPORT>- failed to add entry <ENTRY_ID>
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error applying the ACL due to lack of hardware resources.

Event ID: 49 (Severity: Warning)

Message	acl: unable to add port to dynamic trunk- ACL is configured on port <LPORT>
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that the port cannot be added to a trunk because the port has an ACL applied, or the port cannot be enabled for LACP because the port has an ACL applied.

Event ID: 50 (Severity: Warning)

Message	Unable to add ACL to port <LPORT>- an ACL or Policy is already configured on this port
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error attempting to add a port to a dynamic trunk. Dynamic trunks are not allowed to be configured on ports with ACLs applied.

Event ID: 51 (Severity: Warning)

Message	Unable to modify ACL <LPORT>- ACL is applied.
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log even informs the users that the ACL on <LPORT> was not modified because an ACL was already applied.

Event ID: 52 (Severity: Warning)

Message	Unable to delete ACL <LPORT>- ACL is applied.
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log even informs the users that the ACL on <LPORT> was not deleted because an ACL was already applied.

Event ID: 53 (Severity: Warning)

Message	acl: unable to apply <ACL_NAME> to vlan <VLAN_NAME>- failed to add entry <ENTRY_ID>
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error applying the ACL due to lack of hardware resources.

Event ID: 54 (Severity: Warning)

Message	acl: unable to apply <ACL_NAME> to vlan <VLAN_NAME>- failed to add entry <ENTRY_ID>
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error applying the ACL to a tunnel or a port during init.

Event ID: 55 (Severity: Warning)

Message	acl: unable to apply <ACL_NAME>- failed to add entry <ENTRY_ID>- max ACE limit reached
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error applying the ACL due to max system ACE limit

Event ID: 3348 (Severity: Warning)

Message	Invalid ACE has been deleted from ACL <ACL_NAME>
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that an ACE was deleted from an ACL because the ACE conflicted with another entry that was using the same match parameters, or the ACE was a duplicate of another already in the list.

Event ID: 3349 (Severity: Warning)

Message	unable to add ACL <ACL_NAME>- not enough hw resources available
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that when processing ACL configuration during init, a failure occurred enabling the deny IPv4 tcp fragment option or enabling the IPv6 option to deny packets with too many extension headers.

Event ID: 4600 (Severity: Warning)

Message	Unable to apply ACL <ACL_NAME> in direction <In\|OUT> because the <VLAN_ID> specified is invalid
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that there was an error applying the ACL due to the Invalid VLAN_ID.

Event ID: 5534 (Severity: Warning)

Message	A duplicate entry (source IP: <SRC_IP>- destination IP: <DST_IP>- destination port: <DST_PORT>.) within an alias ACE (seq num: <SEQ_NUM>) has not been configured.
Platforms	KB, WB, WC, YC
Category	ACL
Severity	Warning
Description	acl: A duplicate entry (source IP, destination IP ; destination port) within an alias ACE (seq num) has not been configured. This log event informs the user that during expansion of an alias ACE, a duplicate entry was found and not configured.

Event ID: 5535 (Severity: Warning)

Message	A conflicting entry (source IP: <SRC_IP>- destination IP: <DST_IP>- destination port: <DST_PORT>.) within an alias ACE (seq num: <SEQ_NUM>) has not been configured.
Platforms	KB, WB, WC, YC
Category	ACL
Severity	Warning
Description	This log event informs the user that during expansion of an alias ACE, a conflicting entry was found and not configured.

Event ID: 5536 (Severity: Warning)

Message	One or more alias ACE entries were not configured as the maximum limit of configurable ACEs is reached.
Platforms	KB, WB, WC, YC
Category	ACL
Severity	Warning
Description	acl: One or more alias ACE entries were not configured as the maximum limit of configurable ACEs is reached. This log event informs the user that during expansion of an alias ACE, one or more alias ACE entries were not configured as maximum limit of configurable ACEs has reached.

Event ID: 5785 (Severity: Warning)

Message	The command 'ip access-list <ADDRESS>' is deleted from the configuration since the name has invalid character '.'.
Platforms	KB, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	acl: The command 'ip access-list address is deleted from the configuration since the name has invalid character '.'. This log event informs the user that the ip access-list configuration is deleted since the name had invalid character '.'.

Event ID: 5792

Message	Netdestination configuration changes are applied successfully.
Platforms	KB, WC, YC
Category	ACL
Severity	Information
Description	Informs the user that the netdestination configuration changes are applied successfully.

Event ID: 5793 (Severity: Warning)

Message	Failed to <REVERT_STR\APPLY_STR> netdestination configuration changes- reason: <NET_DESTINATION_EDIT_ERR_STR>
Platforms	KB, WC, YC
Category	ACL
Severity	Warning
Description	Informs the user that the netdestination configuration changes are not applied successfully.

Event ID: 5816 (Severity: Warning)

Message	Failed to update access control entry seq num <RULE_ID> in access control list <POLICY_NAME>. Please configure the previous access control entry.
Platforms	KB, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	acl: Failed to update access control entry seq num 10 in access control list 'guest'. Please configure the previous access control entry. This log event informs the user that the access control entry in access control list is not updated successfully.

Event ID: 5817 (Severity: Warning)

Message	Failed to update class entry seq num <RULE_ID> in class <POLICY_NAME>. Please configure the previous class entry.
Platforms	KB, WB, WC, YA, YB, YC
Category	ACL
Severity	Warning
Description	acl: Failed to update class entry seq num 10 in class 'outbound'. Please configure the previous class entry. This log event informs the user that the match/ignore entry in class is not updated successfully.