DLDP Events
The following are the events related to DLDP.
Event ID: 4644
|
Message |
Service enabled |
|
Platforms |
KB, WB, WC, YA, YB, YC |
|
Category |
DLDP |
|
Severity |
Information |
|
Description |
This log event informs the user that DLDP is enabled. |
Event ID: 4645
|
Message |
Service disabled |
|
Platforms |
KB, WB, WC, YA, YB, YC |
|
Category |
DLDP |
|
Severity |
Information |
|
Description |
This log event informs the user that DLDP is disabled. |
Event ID: 4646 (Severity: Warning)
|
Message |
Port <PORT_ID> changed to Unidirectional mode |
|
Platforms |
KB, WB, WC, YA, YB, YC |
|
Category |
DLDP |
|
Severity |
Warning |
|
Description |
Indicates that port has changed to unidirectional mode. This is the initial DLDP port state to start with. Once a confirmed neighbor is detected, the port state changes to Bidirectional. When all the confirmed neighbors on the port age out, they are deleted from the neighbor list and the port state is set to unidirectional. |
Event ID: 4647
|
Message |
Port <PORT_ID> changed to Bidirectional mode |
|
Platforms |
KB, WB, WC, YA, YB, YC |
|
Category |
DLDP |
|
Severity |
Information |
|
Description |
Indicates that port has changed to Bidirectional mode. DLDP starts with setting the port state to unidirectional and keeps sending RECOVER_PROBE packets out the DLDP ports. When a matching RECOVER_ECHO is received from a device, it is added to the port's list of confirmed neighbors and the port state changes to Bidirectional is this all required? Or we can just say, once a confirmed neighbor is detected, the port state changes to Bidirectional. |
Event ID: 4648 (Severity: Warning)
|
Message |
Unsupported DLDP version number <VERSION_NUMBER> received. This device only supports version 0x001. |
|
Platforms |
KB, WB, WC, YA, YB, YC |
|
Category |
DLDP |
|
Severity |
Warning |
|
Description |
Indicates that there is a mismatch between the received frames DLDP version number and the standard DLDP version number which is use. |
Event ID: 4649 (Severity: Warning)
|
Message |
Neighbor advertisement interval <INTERVAL_TIME> does not match local value of <CFG_INTERVAL_VAL>. |
|
Platforms |
KB, WB, WC, YA, YB, YC |
|
Category |
DLDP |
|
Severity |
Warning |
|
Description |
Indicates that there is a mismatch between the received DLDP frame's advertisement interval and the advertisement interval locally configured in the switch. |
Event ID: 4650 (Severity: Warning)
|
Message |
Neighbor authentication mode MD5 does not match local mode NONE. |
|
Platforms |
KB, WB, WC, YA, YB, YC |
|
Category |
DLDP |
|
Severity |
Warning |
|
Description |
Indicates that there is a mismatch between the received DLDP frame's authentication mode and the authentication mode locally configured in the switch. |
Event ID: 4651 (Severity: Warning)
|
Message |
Authentication failure on port <PORT_ID>. |
|
Platforms |
KB, WB, WC, YA, YB, YC |
|
Category |
DLDP |
|
Severity |
Warning |
|
Description |
Indicates that there is a mismatch between the received DLDP frame's authentication password and the password locally configured in the switch. |
