Fault Events

The following are the events related to fault.

Event ID: 327

Message	port <PORT_NUM>-Excessive undersized/giant packets. See help.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Information
Description	This log event informs that this port receives excessive undersized/giant packets.

Event ID: 328

Message	port <PORT_NUM> Excessive jabbering/fragments. See Help
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Information
Description	This log event informs that this port receives excessive jabbering/fragments.

Event ID: 329

Message	port <PORT_NUM> -Excessive CRC/alignment errors. See help.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Information
Description	This log event informs about the excessive CRC/alignment errors.

Event ID: 330

Message	port <PORT_NUM> -Excessive late collisions.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Information
Description	This log event informs about the excessive late collisions.

Event ID: 331

Message	port <PORT_NUM> -High collision or drop rate. See help.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Information
Description	This log event informs about the high collision or drop rate.

Event ID: 332

Message	port <PORT_NUM>-Excessive Broadcasts. See help.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Information
Description	This log event informs about the excessive broadcasts.

Event ID: 333

Message	port <PORT_NUM> - Loss of Link
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Information
Description	This log event informs about the loss of link.

Event ID: 334 (Severity: Warning)

Message	Port <PORT_NUM> - Security violation caused by MAC address <MAC_ADDRESS>.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Warning
Description	This log event informs abou the security violation caused by specific MAC address.

Event ID: 380 (Severity: Warning)

Message	port <PORT_NUM> - Disabled due to speed mismatch. See help.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Warning
Description	The reason why the management port has due to speed mismatch see help.

Event ID: 402 (Severity: Warning)

Message	Stack member <STACK ID> lost.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Warning
Description	The reason why the management member has lost.

Event ID: 883 (Severity: Warning)

Message	Port failure. Port <PORT_ID> has been reset.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Warning
Description	The reason why the management failure has id has been reset.

Event ID: 2671 (Severity: Warning)

Message	Port <PORT_ID> has been downgraded to 10/100. See www.hp.com/networking/device_help/nic_update for details.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Warning
Description	The reason why the management port has been downgraded to see www.hp.com/networking/device_help/nic_update for details.

Event ID: 2672 (Severity: Fatal)

Message	port <PORT_NUM> -Excessive link state transitions
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Fatal
Description	The reason why the management port has link state transitions.

Event ID: 2673 (Severity: Fatal)

Message	port <PORT_NUM> -Port disabled by Fault-finder.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Fatal
Description	The reason why the management port has disabled by fault finder.

Event ID: 2674 (Severity: Fatal)

Message	port <PORT_NUM> -Administrator action required to re-enable.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Fatal
Description	The reason why the management port has action required to re-enable.

Event ID: 2675 (Severity: Warning)

Message	port <PORT_NUM> -Excessive Broadcasts. Broadcast-storm control threshold <THRESHOLD_VALUE> pps exceeded.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Warning
Description	To send logs when broadcast storm control is enabled on per port basis-fault finder.

Event ID: 2676 (Severity: Warning)

Message	port <PORT_NUM>-Excessive Broadcasts. Broadcast-storm control threshold <THRESHOLD_VALUE> percent exceeded.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Warning
Description	To send logs when broadcast storm control is enabled on per port basis-fault finder.

Event ID: 5514 (Severity: Warning)

Message	port <PORT ID> is receiving excessive non-standard Ethernet preambles. If this reoccurs frequently- check the connected device to ensure it complies with the Ethernet standard.
Platforms	KB, WB, WC, YA, YB, YC
Category	Fault
Severity	Warning
Description	The reason why the management port has receiving excessive non standard ethernet preambles if this reoccurs frequently check the connected device to ensure it complies with the ethernet standard.

Event ID: 5737

Message	port <PORT_NAME>-Excessive Multicasts. See help.
Platforms	KB, WC, YA, YB, YC
Category	Fault
Severity	Information
Description	This message will be logged by fault finder module if there is multicast storm.

Event ID: 5739 (Severity: Warning)

Message	port <PORT_NAME> -Excessive Multicasts. Multicast-storm control threshold <THRESHLD_VALUE> percent exceeded.
Platforms	KB, WC, YA, YB, YC
Category	Fault
Severity	Warning
Description	This event is used to indicate by fault-finder for multicast-storm when the threshold percent exceeded.

Event ID: 5740 (Severity: Warning)

Message	port <PORT_NAME> -Excessive Multicasts. Multicast-storm control threshold <THRESHLD_VALUE> pps exceeded.
Platforms	KB, WC, YA, YB, YC
Category	Fault
Severity	Warning
Description	This event is used to indicate by fault-finder for multicast-storm when the threshold pps exceeded.

Event ID: 5753

Message	Port-security disable timer set for port: <PORT_NAME>
Platforms	KB, WC
Category	Fault
Severity	Information
Description	This message will be logged when port-security disable timer set for port: <PORT_NAME>

Event ID: 5754

Message	port-security disable timer expired for port: <PORT_NAME>
Platforms	KB, WC
Category	Fault
Severity	Information
Description	This message will be logged when port-security disable timer expired for port: <PORT_NAME>

Event ID: 5885 (Severity: Warning)

Message	Firmware downgrade is not allowed when port-security with mixed learn-mode is configured on any of the switch ports. Please remove port-security configuration with mixed learn-mode to continue the downgrade.
Platforms	KB, WC
Category	Fault
Severity	Warning
Description	Firmware downgrade is not allowed when port-security with mixed learn-mode is configured on any of the switch ports.Please remove port-security configuration with mixed learn-mode to continue the downgrade.