Load Balancer Events

The following are the events related to Load Balancer.

Event ID: 344

Message

Load Balance Protocol enabled.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Information

Description

This log event informs the user that Load Balance Protocol is enabled on the Switch.

Event ID: 345

Message

Load Balance Protocol disabled.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Information

Description

This log event informs the user that Load Balance Protocol is disabled on the Switch.

Event ID: 346

Message

<PORT_ID> — established.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Information

Description

This log event informs the user that the LDBAL port enters the established state.

Event ID: 347 (Severity: Warning)

Message

<PORT_ID> - not established.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event informs the user that the LDBAL port enters the not established state.

Event ID: 348 (Severity: Warning)

Message

<PORT_ID> - detected topology error: <MAC_ADDRESS>.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event informs the user that the LDBAL port enters the error state (bad topology has been detected on that port.

Event ID: 349 (Severity: Warning)

Message

Domain size exceeded protocol-imposed limit: <DOMAIN_COUNT>.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event informs the user that number of load balance switches in the domain exceeded the protocol-defined limit.

Event ID: 350

Message

<PORT_ID> - Received untagged packet. Packet Type <TYPE_ID>.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Information

Description

This log event informs the user that an untagged packet was received on a Load-Balance established port

Event ID: 351

Message

<PORT_ID> - Receivedx Type2 Query NAK.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Debug

Description

This log event informs the user that a Type2 Query NAK was received on a Load-Balance established port.

Event ID: 352

Message

<MAC_ADDRESS> moved from <WARNING_STRING> to <WARNING_STRING>, <MAC_ADDRESS>R.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Debug

Description

This log event informs the user that a MAC address moved.

Event ID: 353

Message

<PORT_ID> - Received Update Packet from <MAC_ADDRESS>

Platforms

K, KA, KB

Category

Load Balancer

Severity

Debug

Description

This log event informs the user that a updated packet received form MAC.

Event ID: 354

Message

Nonexistent address <MAC_ADDRESS> deleted.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Debug

Description

This log event informs the user that a MAC address that does not exist in the LdBal tables is being deleted.

Event ID: 355

Message

<WARNING_STRING>: <MAC_ADDRESS> MISMATCH. NUM. Software <MAC_ADDRESS>.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Debug

Description

This log event informs the user that a MAC address that exists in the LdBal-S/w address tables does not exist in the H/w Addr Tables

Event ID: 356

Message

<PORT_ID> - ACK failure for packet <COUNT-NUM>.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Debug

Description

This log event informs the user that the LDBAL port has been disabled since the retransmit count was exceeded for a packet requiring an ACK

Event ID: 357 (Severity: Warning)

Message

<PORT_ID> load balance version VERSION-ID not supported- update firmware.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event informs the user that the received load balance packet contains a version of the protocol not supported by this switch's operating system.

Event ID: 358

Message

<WARNING_STRING>

Platforms

K, KA, KB

Category

Load Balancer

Severity

Debug

Description

A generic message descriptor. Used to logging debug messages

Event ID: 444 (Severity: Warning)

Message

<PORT_ID>: received mesh packet on non-mesh port.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event informs the user that a port received a mesh packet on a non-mesh port.

Event ID: 445 (Severity: Warning)

Message

Cannot accept switch 1600/24xx/4000/8000 into mesh.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event informs the user that the switch is in compatibility mode MODE_M, which means that there are two alphas that have the same mac programmed in on different vlans. If this is the case, a voyager will not be allowed into the mesh.

Event ID: 446 (Severity: Warning)

Message

Max. hop count exceeded. Check your mesh topology.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event warns the user that mesh domain has exceeded the maximum hop count. When this happens, cost packets will not propagate furter, resulting in immature mesh domain.

Event ID: 447

Message

<PORT_ID> — initialized.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Information

Description

This log event informs the user that the LDBAL port enters the initialization state.

Event ID: 451 (Severity: Warning)

Message

Unsupported protocol. Upgrade <MAC_ADDRESS>R's firmware.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event informs the user that the received load balance packet contains a protocol number that is not supported by this switch's operating system.

Event ID: 452 (Severity: Warning)

Message

Inconsistent WARN-STRING config with <MAC_ADDRESS><MAC_ADDRESS>R.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event informs the user there is a mismatch in configuration across the mesh. According to the mesh rules, this is not allowed.

Event ID: 453 (Severity: Warning)

Message

Incompatible mesh switch <MAC_ADDRESS><MAC_ADDRESS> detected on <PORT_ID>.

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event informs the user the switch received a meshing protocol packet on a mesh port that is in a different mode than what the switch is in.

Event ID: 4633 (Severity: Warning)

Message

Configuration entry was removed because MAC-Notify traps cannot be enabled on a port that is a member of a trunk., Mac-notify traps <PORT_ID> MAC-NOTIFY-ID

Platforms

K, KA, KB

Category

Load Balancer

Severity

Warning

Description

This log event informs the user the Mac Notify configuration is disabled on port which is part of trunk.