Loop Protect Events

The following are the events related to Loop Protect.

Event ID: 884 (Severity: Warning)

Message	port <PORT_ID> disabled - loop detected.
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	Loop Protect
Severity	Warning

Event ID: 885 (Severity: Warning)

Message	Port <PORT_ID> disabled - trunk is disabled.
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	Loop Protect
Severity	Warning
Description	Trunk is removed or port is moved into a trunk.

Event ID: 886

Message	port <PORT_ID> - loop detected.
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	Loop Protect
Severity	Information
Description	Loop detected, log the message.

Event ID: 887

Message	port <PORT_ID> — disable period expired.
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	Loop Protect
Severity	Information
Description	Disable period for port has expired and an attempt to reenable the port by loop protection has been made.

Event ID: 888

Message	port <PORT_ID> - received packet failed authentication (TYPE: 1|2..).
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	Loop Protect
Severity	Information
Description	Pkt failed authentication, log authentication failed message.

Event ID: 889

Message	port <PORT_ID> - continuous loop detected; manually disable port to stop this message.
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	Loop Protect
Severity	Information
Description	Continuous loop detected, take action according to the receiver-action configured by the user.

Event ID: 3301

Message	Mismatch between local and remote DT ports
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	Loop Protect
Severity	Information

Event ID: 3302

Message	Auto re-enable timer configuration is different between DT peers
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	Loop Protect
Severity	Information

Event ID: 4811

Message	The disable timer value for loop protect <TIMER_VAL> is invalid; configuration is removed
Platforms	K, KA, KB, RA, WB, WC, YA, YB, YC
Category	Loop Protect
Severity	Information
Description	This log event informs the user that an invalid value for loop protect disable timer has been removed from configuration.