OSPF3 Events
The following are the events related to OSPF3.
Event ID: 2801
|
Message |
Interface Module image id <SLAVE_IMAGE_ID> corrupted. |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2802
|
Message |
System Self test started on <'STAND_ALONE' OR 'MASTER'> |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2803
|
Message |
System Self test completed on <'STAND_ALONE' OR 'MASTER'> |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2804
|
Message |
System Self test failed on <'STAND_ALONE' OR 'MASTER'> |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when a slot that has EEE HW issue gets a EEE enable request from config |
Event ID: 2805
|
Message |
EEE cannot be enabled on <SLOT_NAME> on this hardware revision. |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when module in indicated slot violates a quantity and/or slot-configuration restriction. |
Event ID: 2806
|
Message |
<SLOT_NAME> Invalid: Module not supported in this quantity and/or slot configuration |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when a version 1 zl blade is inserted into a Bolt/Rhino chassis |
Event ID: 2807
|
Message |
<SLOT_NAME> Invalid: The module is not supported in this chassis. |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2808
|
Message |
ADJCHG: Invalid LSA packet from <NEIGHBOR_ROUTER_ID> on interface <INTERFACE_NAME>: No such neighbor |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2809
|
Message |
ADJCHG: Neighbor <NEIGHBOR_ROUTER_ID> on interface <INTERFACE_NAME> moved to new-state state- <EVENT_NAME> |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
HSL/NCI fatal interrupts from fabric on stacking devices |
Event ID: 2810
|
Message |
ADJCHG: Neighbor <NEIGHBOR_ROUTER_ID> on interface <INTERFACE_NAME> moved to new-state state- <EVENT_NAME> |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
HSL/NCI non-fatal interrupts from fabric on stacking devs |
Event ID: 2811
|
Message |
ADJCHG: Discarding <PACKET_TYPE> packet from <NEIGHBOR_ROUTER_ID> on interface <INTERFACE_NAME> at <STATE_NAME> state: reason |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2812
|
Message |
ADJCHG: Invalid router priority configuration on interface <INTERFACE_NAME>. All routers in the network are configured with priority zero: No DR elected |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2813
|
Message |
ADJCHG: Too many neighbors for HELLO packet on interface <INTERFACE_NAME>- truncating |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2814
|
Message |
ADJCHG: Invalid event at <STATE_NAME> state |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when user change allocated power for PPS |
Event ID: 2815
|
Message |
INIT: Router ID is not defined. OSPFv3 is not enabled |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when user's power allocation request could not be serviced |
Event ID: 2816
|
Message |
INIT: Failed to get socket |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when status of PPS changed |
Event ID: 2817
|
Message |
INIT: Failed to set receive buffer size to recv-buffer-size |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when PPS has been restored to factory default |
Event ID: 2818
|
Message |
INIT: Failed to set send buffer size to send-buffer-size |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when status of PPS PSU mismatch |
Event ID: 2819
|
Message |
INIT: Failed to Set receive destination address |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when 12v standby rail is bad |
Event ID: 2820
|
Message |
INIT: Failed to Set receive interface |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when we detected xps POE power change |
Event ID: 2821
|
Message |
INIT: Failed to Set receive hoplimit |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when PPS encountered over current |
Event ID: 2822
|
Message |
INIT: Failed to set outgoing multicast hoplimit to 1 |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when PPS encountered over temperature |
Event ID: 2823
|
Message |
RECV: Discarding <PACKET_TYPE> packet from neighbor_router-id on interface <INTERFACE_NAME>: Receive queue full |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when mail rail is bad |
Event ID: 2824
|
Message |
INTF: Failed to join multicast group multicast-group-address on interface <INTERFACE_NAME>: error-string |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Log message for generic xps error |
Event ID: 2825
|
Message |
SEND: Failed to send virtual link packet: Non-linklocal address is not configured on the interface |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when PPS is ready |
Event ID: 2826
|
Message |
INTF: Failed to set multicast on interface <INTERFACE_NAME>: error-msg |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when PPS has an unsupported PSU inserted |
Event ID: 2827
|
Message |
RECV: Discarding packet on interface <INTERFACE_NAME>: error-msg |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when HSC on PPS is not turned on |
Event ID: 2828
|
Message |
RECV: Discarding packet on interface <INTERFACE_NAME>: Received frame size <RECEIVED_FRAME_LENGTH> is less than OSPFv3 packet header size <MIN_HEADER_SIZE> |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when PPS cannot be restored to factory default. |
Event ID: 2829
|
Message |
RECV: Discarding packet on interface <INTERFACE_NAME>: Header length (header-length) is not equal to kernel read length <READ_LENGTH> |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when mailbox has been locked by another system |
Event ID: 2830
|
Message |
RECV: OSPFv3 instance mismatch on interface <INTERFACE_NAME>: expected <CONFIGURED_INSTANCE_ID>- received <RECEIEVD_INSTANCE_ID> |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when low priority power reduction is successful |
Event ID: 2831
|
Message |
RECV: Discarding packet on interface <INTERFACE_NAME>: Mandatory zero field(s) not zero |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Low priority power reduction failed |
Event ID: 2832
|
Message |
RECV: Discarding packet on interface <INTERFACE_NAME>: Protocol version mismatch: expected configured-version- received received-version |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
Message displays when HSC control cmd failed |
Event ID: 2833
|
Message |
RECV: Discarding packet on interface <INTERFACE_NAME>: Unknown packet type <PACKET_TYPE> |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2834
|
Message |
RECV: Discarding packet on interface <INTERFACE_NAME>: Duplicate <ROUTER_ID>: router id <NEIGHBOR_ROUTER_ID> same as the local router id |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2835
|
Message |
RECV: Discarding packet on interface <INTERFACE_NAME>: Invalid IPv6 hop limit: expected 1- received received-hop-limit |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when a fabric error is detected on the stacking link that connects this member to another member in a backplane stack. Error may be recoverable, but if persistent the stacking cable, stacking module or chassis needs field replacement. |
Event ID: 2836
|
Message |
RECV: Discarding LSA on interface <INTERFACE_NAME>: LSA type ls-type- lsid -ls-id- Advertising Router <NEIGHBOR_ROUTER_ID>: reason |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when a fabric error is detected on the stacking link that connects this member to another member in a backplane stack. Error may be recoverable, but if persistent the stacking cable, stacking module or chassis needs field replacement. |
Event ID: 2837
|
Message |
RESTART: Invalid Grace LSA on interface <INTERFACE_NAME>: Option length mismatch |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2838
|
Message |
RESTART: Invalid Grace LSA on interface <INTERFACE_NAME>: Invalid Grace Period TLV length: expected 4- received received-tlv-length |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
Event ID: 2839
|
Message |
RESTART: Invalid Grace LSA on interface <INTERFACE_NAME>: Grace Period TLV missing |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when an inserted expansion module is different than what has been provisioned for the slot in a stacking context. |
Event ID: 2840
|
Message |
RESTART: Invalid Grace LSA on interface <INTERFACE_NAME>: Invalid Restart Reason TLV length: expected 1- received received-tlv-length |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when an inserted expansion module is different than what has been provisioned for the slot in a standalone context. |
Event ID: 2841
|
Message |
RESTART: Invalid Grace LSA on interface <INTERFACE_NAME>: Restart Reason TLV missing |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when an expansion module is inserted in a stacked switch. |
Event ID: 2842
|
Message |
RESTART: Invalid Grace LSA on interface <INTERFACE_NAME>: Unknown restart reason restart-reason-value |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when an expansion module is inserted in a standalone switch. |
Event ID: 2843
|
Message |
SPF: Failed to find local interface for nexthop next-hop-ip |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when an inserted expansion module is powered up or inserted and becomes active in a stack. |
Event ID: 2844
|
Message |
RESTART: Restart will not happen. Grace Period already expired |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
This message displays when an inserted expansion module is powered up or inserted and becomes active in a standalone switch. |
Event ID: 2845
|
Message |
Configured Hello Interval configured-hello-interval seconds on virtual interface <ROUTER_ID> is greater than configured Dead Interval. Hello Interval set to default (10 seconds). |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
Information |
|
Description |
This message displays when an expansion module is unprovisioned in a stack. |
Event ID: 2846
|
Message |
Configured Dead Interval configured-dead-interval seconds on virtual interface <ROUTER_ID> is less than configured Hello Interval. Dead Interval set to default (40 seconds). |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
Information |
|
Description |
This message displays when an expansion module is unprovisioned in a standalone switch. |
Event ID: 2847
|
Message |
RESTART: Exiting helper mode for ngb <NEIGHBOR_ROUTER_ID> |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
Information |
|
Description |
This message displays when an expansion module is powered down in a stack. |
Event ID: 2848
|
Message |
Failed to join multicast group group-ip on interface <INTERFACE_NAME>, error number string |
|
Platforms |
K, KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
Information |
|
Description |
This message displays when an expansion module is powered down in a standalone config. |
Event ID: 2849
|
Message |
ADJCHG: Discarding invalid DD packet from <ROUTER_ID> on interface <IF_NAME> : <ERROR_NAME> |
|
Platforms |
KA, KB, WB, WC |
|
Category |
OSPF3 |
|
Severity |
None |
|
Description |
OSPF3 Message 48 - DD Packet processing |
