Stacking Events

The following are the events related to Stacking.

Event ID: 399

Message

Stack Protocol enabled

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

Stacking

Severity

Information

Description

This log event informs the user that Stack Protocol is enabled on the Switch.

Event ID: 400

Message

Stack Protocol disabled

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

Stacking

Severity

Information

Description

This log event informs the user that Stack Protocol is disabled on the Switch.

Event ID: 401

Message

A generic message descriptor. Used for logging debug messages

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

Stacking

Severity

Debug

Description

A generic message descriptor used for logging debug messages.

Event ID: 537

Message

Syncing <primary|secondary> to <standby|member N>

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

Stacking

Severity

Information

Description

Logged when OS file sync to standby|member starts|ends.

Event ID: 538

Message

Standby <BOOT IMAGE> updated- rebooting standby

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

Stacking

Severity

Information

Description

Logged when standby's boot image or default boot selection. was overwritten; necessitating a reboot.

Event ID: 539

Message

Initial sync to <ACTIVE|STANDBY to STANDBY|MEMBER N><STARTED/COMPLETED>

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

Stacking

Severity

Information

Description

Start|end of initial synchronization of active's CF to standby.

Event ID: 540

Message

Redundant Standby Management Module syncing is <INPROGRESS|COMPLETED>. Configuration changes are <TEMPORARILY DISABLED| ENABLED>

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

Stacking

Severity

Information

Description

This message displays when the changes to configuration is disabled or. enabled; when the redundant standby management module syncing start or complete.

Event ID: 541

Message

Out of storage space on <SYSTEM: PARTITION>

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

Stacking

Severity

Information

Description

This message displays when the module disk is full and file sync. is not possible

Event ID: 3250

Message

Received stacking packet with incompatible version

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates that we got a packet with a diff proto ver

Event ID: 3251 (Severity: Warning)

Message

Stack port cable looped back between ports <REMOTE_PORT> and <STACK_PORT>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates that the stack cable is looped back to. the same switch

Event ID: 3252

Message

Switch with stack ID <STACK_ID> cannot join stack due mismatch stack ID

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates that the stack cable is looped back to. the same switch

Event ID: 3253 (Severity: Warning)

Message

Maximum number of switches in the stack has been reached. Cannot add <STACK_ID> type <PRODUCT_ID>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates that we would exceed the MAX. switches if we add this new switch

Event ID: 3257 (Severity: Warning)

Message

Reboot of <STACK_ID><PRODUCT_ID>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates the status of a reboot request

Event ID: 3258 (Severity: Warning)

Message

<SWITCH TYPE> switch with Member ID <MEMBER_ID> removed due to <MESSAGE STR>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates the status of a reboot request

Event ID: 3259 (Severity: Warning)

Message

The switch software version doesn't match the version on the stack commander- waiting for reboot

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates that stack member has incorrect SW version and has to reboot

Event ID: 3260

Message

Member booted

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates that member is booted

Event ID: 3261

Message

Member active

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates that member is active

Event ID: 3262

Message

Member failed because synchronization failed

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates that member is failed synchronization

Event ID: 3263 (Severity: Warning)

Message

Member went down: <MEMBER_ID>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates that member is crashed

Event ID: 3264 (Severity: Fatal)

Message

Crash info: <CRASH_STR>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Fatal

Description

This log event indicates that reason of the crash

Event ID: 3265

Message

Lost Communication with Member <MEMBER_ID>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates that communication lost with member

Event ID: 3266

Message

Resetting member

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates that member is reseting

Event ID: 3267

Message

Failover occurred

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates that failover occurred

Event ID: 3268

Message

User initiated switchover occurred

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates that switchover occurred

Event ID: 3269

Message

Shutting down Member

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates that member is being shut down

Event ID: 3270 (Severity: Warning)

Message

Topology is a <TYPE: STANDALONE|RING|CHAIN|MESH|PARTIAL MESH>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates that a non supported topology exits

Event ID: 3271

Message

Topology is a <TYPE: STANDALONE|RING|CHAIN|MESH|PARTIAL MESH>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates the current topology

Event ID: 3272

Message

Stack <FRAGMENT><ACTIVE/INACTIVE>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event indicates stack state.

Event ID: 3273 (Severity: Warning)

Message

Member <MEMBER_ID> with mac <MAC_ADDRESS> was deleted so missing member could be added

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates that a stacking member was deleted from. config to make room for a missing member

Event ID: 3274 (Severity: Warning)

Message

Member<MEMBER_ID> with mac <MAC_ADDRESS> was replaced so missing member could be added

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates that a stacking member in config was updated with a new mac so we could add a missing member

Event ID: 3275 (Severity: Warning)

Message

<TYPE: UNKNOWN|COMMANDER|STANDBY|MEMBER|PROVISIONED> switch with Member ID <MEMBER_ID> removed due to user request

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates the member has been removed due to user request

Event ID: 3276 (Severity: Warning)

Message

<TYPE: UNKNOWN|COMMANDER|STANDBY|MEMBER|PROVISIONED> switch with Member ID <MEMBER_ID> removed

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates the member has been removed.

Event ID: 3277 (Severity: Warning)

Message

Member <MEMBER_ID><STACK_ID> cannot join stack due to incorrect product id: <PRODUCT_ID>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates the member was not allowed to join due to. a mismatched product-id (j-number)

Event ID: 3278

Message

Member <MEMBER_ID><STACK_ID> elected as commander. Reason: <REASON_STR>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event provides the reason this switch won the commander. election

Event ID: 3279

Message

Member <MEMBER_ID><STACK_ID> chosen as standby. Reason: <REASON_STR>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

This log event provides the reason this switch won the standby. election

Event ID: 3280 (Severity: Fatal)

Message

Ignoring Member <MAC_ADDRESS><PRODUCT_ID_MESSAGE>: unsupported topology.

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Fatal

Description

This log event indicates that a unsupported topology exists

Event ID: 3281 (Severity: Warning)

Message

Merge of member <MEMBER_ID> with mac <MAC_ADDRESS> blocked due to mismatch in config.

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

This log event indicates that a fragment couldn't merge to an another active fragement due to mismatch in config

Event ID: 3282 (Severity: Warning)

Message

Found switch <MAC_ADDRESS> running an older version of the stacking protocol. Upgrade the switch to the same version as the commander or greater to join the stack.

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Event ID: 3283 (Severity: Warning)

Message

Found Unsupported switch with mac <MAC_ADDRESS> and Product type <PRODUCT_ID> Connected to switch with mac <MAC_ADDRESS> on stack port <PORT_ID>

Platforms

KA, KB, WB, WC, YC

Category

Stacking

Severity

Warning

Description

Found Unsupported switch with mac <MAC_ADDRESS> and Product type <PRODUCT_ID> Connected to switch with mac <MAC_ADDRESS> on stack port <PORT ID>

Event ID: 3284

Message

Member <MEMBER_ID> cannot be removed/shutdown as it does not exist or is not provisioned.

Platforms

KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

Event indicates that stacking member is not removed or shutdown as it does not exist or is not provisioned.

Event ID: 3285

Message

Member <MEMBER_ID> cannot be removed/shutdown as it would result in a stack split.

Platforms

KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

Event indicates that stacking member is not removed or shutdown as it will result in stack split.

Event ID: 3286

Message

Member <MEMBER_ID> cannot be removed/shutdown as standby sync is in progress.

Platforms

KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

Event indicates that stacking member is not removed or shutdown as standby sync is in progress.

Event ID: 3287

Message

The commander cannot be shut down. Please switchover to the standby first.

Platforms

KB, WB, WC, YC

Category

Stacking

Severity

Information

Description

Event indicates that command will not be shutdown. Switch over to standby first.

Event ID: 3381 (Severity: Warning)

Message

Stacking Port <PORT_ID> communications - self test failure ERR: <ERROR_STR>.

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

Stacking

Severity

Warning