VLAN Events

The following are the events related to VLAN.

Event ID: 1

Message

<VLAN_ID> virtual LAN enabled

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

VLAN

Severity

Information

Description

This log event informs the user when a virtual LAN comes up. This happens when the first port defined to be part of that virtual LAN comes up.

Event ID: 2

Message

<VLAN_ID> virtual LAN disabled

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

VLAN

Severity

Information

Description

This log event informs the user when a virtual LAN has gone down. This happens when the last port defined to be a part of the virtual LAN goes down.

Event ID: 323

Message

vlan <VLAN_ID> defined but not active

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

VLAN

Severity

Information

Description

This log event informs the user that a VLAN has been configured, but is being ignored because it has not been marked active.

Event ID: 324 (Severity: Warning)

Message

port <PORT_ID> is member of an invalid VLAN <VLAN_ID>

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

VLAN

Severity

Warning

Description

This log event informs the user that a port has been configured for a vlan that does not exist.

Event ID: 600 (Severity: Warning)

Message

port(s) PORT NUMBER have multiple voice vlan configurations

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

VLAN

Severity

Warning

Description

This log event informs the user that a port has been configured for. multiple voice vlans for a give set of ports.

Event ID: 602 (Severity: Warning)

Message

Mgmt vlan could not be configured on vlan <VLAN_ID>

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

VLAN

Severity

Warning

Description

The management vlan could not be configured due to hw resources.

Event ID: 603

Message

Cannot apply the Appletalk Arp protocol to protocol vlan <VLAN_ID> due to inadequate resources on some ports.

Platforms

K, KA, KB, RA, WB, WC, YA, YB, YC

Category

VLAN

Severity

Information

Event ID: 5171 (Severity: Warning)

Message

A configuration with max-vlans greater than <VALUE> might prevent successful downgrade to previous software versions.

Platforms

KA, KB, WB

Category

VLAN

Severity

Warning