Legal Disclaimer: The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.arubanetworks.com for current and complete HPE Aruba Networking product lines and names.
allow-v2-modules
Syntax
allow-v2-modules
Description
Enables the use of v2 modules in the switch. Before enabling v2 support, the command determines whether any of the v3-native features are configured. This command is active only in v3–native mode.
V3 modules cannot be changed to v2-compatibility mode when there are v3-specific configuration
settings. Use the command 'show running-config v3-specific'
to display the settings that must be changed before enabling v2 module
support.
Unconfigure all v3-only features before moving to compatibility mode.
If the v3-native configuration is not present,
the device reboots with the non-v3 configuration and issues the following
message:This command will save the running configuration and reboot the system with all V3 modules operating
in v2-compatibility mode.Continue (y/n)?
Options
erase
Erases the entire configuration and reboots the switch with either the custom default configuration (if it is available) or the factory default configuration. The command with the erase option is active only in v3–native mode.
Usage
allow-v2-modules erase
More Information
To list the v3-native configurations present in the current configuration, see show running-config v3-specific.
