Secondary Network Interface Settings

Locate the Secondary Network Interface section. The information in this section should match what you defined during initial network configuration and should not require changes. Table 1 describes the settings and default values.

Table 1: Secondary Network Interface Fields and Default Values

Setting

Default

Description

Enabled

No

Select Yes to enable a secondary network interface. You will be prompted to define the IP address and subnet mask.

IP Address

None

Specify the IP address of the AirWave secondary network.

NOTE: This address must be a static IP address. AirWave supports IPv4 and IPv6 addresses.

Subnet Mask

None

Specify the subnet mask for the secondary network interface.