The Aruba 500H Series access points (AP-503H and AP-505H) are high-performance, multi-radio wireless devices that can be deployed in either controller-based (AOS) or controller-less (Instant) modes in hospitality and branch or teleworker deployments. These Hospitality Access Points support the full 802.11ax (Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. 6) feature set with dual 2x2 MIMO Multiple Input Multiple Output. An antenna technology for wireless communications in which multiple antennas are used at both source (transmitter) and destination (receiver). The antennas at each end of the communications circuit are combined to minimize errors and optimize data speed. radios while also supporting 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., and 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band. wireless services for 5 GHz Gigahertz. and, 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz. for 2.4 GHz Gigahertz.. Listed below are features of the Aruba 500H Series access points:

• Compatible with IEEE Institute of Electrical and Electronics Engineers. 802.3bt, IEEE Institute of Electrical and Electronics Engineers. 802.3at 802.3at is an IEEE standard for PoE version that supplies up to 25.5W of DC power. See PoE+., and IEEE Institute of Electrical and Electronics Engineers. 802.3af 802.3af is an IEEE standard for Power over Ethernet (PoE) version that supplies up to 15.4W of DC power. See PoE. PoE Power over Ethernet. PoE is a technology for wired Ethernet LANs to carry electric power required for the device in the data cables. The IEEE 802.3af PoE standard provides up to 15.4 W of power on each port. standards.
• One uplink Ethernet Ethernet is a network protocol for data transmission over LAN. port capable of data rates up to 2.5 Gbps Gigabits per second.. Integrated BLE Bluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. and Zigbee radios.
• Green AP mode.
• Mesh.
• Location beacon applications.
• IoT Internet of Things. IoT refers to the internetworking of devices that are embedded with electronics, software, sensors, and network connectivity features allowing data exchange over the Internet. gateway Gateway is a network node that allows traffic to flow in and out of the network. applications.

NOTE: The AP-505H access point was released in Aruba 8.7.0.0.

AP-503H Access Points – Mid-range dual radio Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. 6 Hospitality APs with the following additional features:

• One uplink Ethernet Ethernet is a network protocol for data transmission over LAN. port capable of data rates up to 1 Gbps Gigabits per second..
• Two downlink Ethernet Ethernet is a network protocol for data transmission over LAN. ports capable of data rates up to 1 Gbps Gigabits per second..
• 5-pin Micro-B connector as console port.

For complete technical details and installation instructions, see Aruba AP-503H Access Point Installation Guide.

The Aruba 560 Series access points (AP-565 and AP-567) are entry level Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. 6 (802.11ax) AP series designed to optimize user experience by maximizing Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. efficiency and reducing airtime contention between clients using Orthogonal frequency-division multiple access (OFDMA), bi-directional multi-user MIMO Multiple Input Multiple Output. An antenna technology for wireless communications in which multiple antennas are used at both source (transmitter) and destination (receiver). The antennas at each end of the communications circuit are combined to minimize errors and optimize data speed. , and cellular optimization for outdoor and warehouse environments.

The Aruba 560 Series access points delivers high performance concurrent 2.4 GHz Gigahertz. and 5 GHz Gigahertz. 802.11ax Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. (Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. 6) functionality with 2x2 MU-MIMO Multi-User Multiple-Input Multiple-Output. MU-MIMO is a set of multiple-input and multiple-output technologies for wireless communication, in which users or wireless terminals with one or more antennas communicate with each other. radios, and supports 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., and 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band. wireless services.

Additional features include:

• Compatible with IEEE Institute of Electrical and Electronics Engineers. 802.3bt, IEEE Institute of Electrical and Electronics Engineers. 802.3at 802.3at is an IEEE standard for PoE version that supplies up to 25.5W of DC power. See PoE+., IEEE Institute of Electrical and Electronics Engineers. 802.3af 802.3af is an IEEE standard for Power over Ethernet (PoE) version that supplies up to 15.4W of DC power. See PoE., IEEE Institute of Electrical and Electronics Engineers. 802.3az PoE Power over Ethernet. PoE is a technology for wired Ethernet LANs to carry electric power required for the device in the data cables. The IEEE 802.3af PoE standard provides up to 15.4 W of power on each port. standards.
• Integrated BLE Bluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. and Zigbee radios.
• USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. -C console interface.
• Zero Touch Provisioning through Aruba Central or AirWave.
• Mesh.
• Intelligent Power Monitoring (IPM Intelligent Power Monitoring. IPM is a feature supported on certain APs that actively measures the power utilization of an AP and dynamically adapts to the power resources.).
• Aruba Advanced Cellular Coexistence (ACC Advanced Cellular Coexistence. The ACC feature in APs enable WLANs to perform at peak efficiency by minimizing interference from 3G/4G/LTE networks, distributed antenna systems, and commercial small cell/femtocell equipment.).
• Aruba Air Slice for Extended OFDMA Assurance.

For complete technical details and installation instructions, see Aruba 560 Series Access Point Installation Guide.