System Information

A user-defined name by which the managed device will be referenced. You can specify a name of up to 63 characters.

The country in which the managed device will operate. The country code determines the 802.11 802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. wireless transmission spectrum. You cannot change the country code for managed devices designated for certain countries, such as the U.S. or Israel. Improper country code assignment can disrupt wireless transmissions. Most countries impose penalties and sanctions for operators of wireless networks with devices set to improper country codes.

Password of up to 32 characters for the admin user to log in to the managed device.

Clock

You can either manually set the date, time, and GMT Greenwich Mean Time. GMT refers to the mean solar time at the Royal Observatory in Greenwich, London. GMT is the same as Coordinated Universal Time (UTC) standard, written as an offset of UTC +/- 00:00. time zone.

Enter the IP address of an NTP Network Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. server from which the managed device will obtain its date and time settings.

Determine if the connectivity to the Mobility Conductor is direct or via a VPN Virtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. concentrator.

Connection to Mobility Conductor is Direct

Specify the IPv4 address or fully qualified domain name of the Mobility Conductor.

Optionally, specify the IPv6 address or fully qualified domain name of the Mobility Conductor on IPv6 networks.

Select Yes or No to specify whether the Mobility Conductor is a virtual machine or not.

Security key for the IPsec Internet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. tunnel between the managed device and the Mobility Conductor. This field supports 6 to 64 characters.

Confirmation of the security key.

Provide a choice of Factory certificate or Pre-Shared Key.

NOTE: This option is displayed when Conductor is a virtual machine is set to No.

Specify the MAC Media Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. of the Mobility Conductor.

Optionally, specify the MAC Media Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. of the redundant Mobility Conductor.

Connection to Mobility Conductor is Via VPN Concentrator

Specify the IPv4 address or fully qualified domain name of the Mobility Conductor.

Optionally, specify the IPv6 address or fully qualified domain name of the Mobility Conductor on IPv6 networks.

Specify the IPv4 address of the VPN Virtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. concentrator to connect to, in order to reach the Mobility Conductor.

Specify the IPv6 address of the VPN Virtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. concentrator to connect to, in order to reach the Mobility Conductor on IPv6 networks.

Specify the IP address of the VPN Virtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. concentrator to connect to in order to reach the Mobility Conductor.

Optionally, specify the MAC Media Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the eventual redundant VPN Virtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. concentrator.

Provide a choice of Factory certificate or Pre-Shared Key.

Security key for the IPsec Internet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. tunnel between the managed device and the VPN Virtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. concentrator, 6 to 64 characters.

Specify the VLAN Virtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID which is an integer. Value range- 1 to 4094.

Specify the default communication interface.

Specify the port mode as either Access or Trunk.

Select Static IP addressing or via DHCP Dynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network. .

Specify the managed device’s IPv4 address.

Specify the Netmask Netmask is a 32-bit mask used for segregating IP address into subnets. Netmask defines the class and range of IP addresses. used to calculate the IP subnet Subnet is the logical division of an IP network..

Specify the default IPv4 gateway Gateway is a network node that allows traffic to flow in and out of the network. used to setup default routes.

Specify the IPv4 address of the DNS Domain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element. server.

Specify the managed device’s IP address on IPv6 networks.

Specify IPv6 VLAN Virtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. 1 interface IP prefix length.

Specify the default gateway Gateway is a network node that allows traffic to flow in and out of the network. on IPv6 networks.

Specify if this controller is managed via an AirWave platform or not.

Specify the IPv4 or IPv6 address of the AirWave platform.

Specify which SNMP Simple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  protocol version is used (v2 or v3).

SNMP version v2

Enter a string with 4 to 31 characters.

SNMP version v3

Enter the username with 1 to 31 characters.

Enter the password with 4 to 128 characters.

Confirmation of the Authentication password.

Enter a privacy password with 4 to 128 characters.

Confirmation of the Privacy password.

Specify the network time server to use. This option is available only if time is set to Set time from this machine in the controller information provided in Table 2.

Generate all traps or just the ones for AirWave.