Aruba Instant User Guide

Aruba Air Slice, based on IEEE Institute of Electrical and Electronics Engineers. 802.11ax standard, is similar to 5G network slicing architecture which allows network administrators to build end-to-end virtual networks tailored for specific application requirements.

Instant supports a new infrastructure to manage any USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. device that is plugged to an AP. The infrastructure allows describing a USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. device through either CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. configuration or by using predefined descriptors, USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. device management through USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  ACLs Access Control List. ACL is a common way of restricting certain types of traffic on a physical port., supports plugin for USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. devices, and sending notification to other processes.

ARM Adaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are allowed ready access. It enables full utilization of the available spectrum to support maximum number of users by intelligently choosing the best RF channel and transmit power for APs in their current RF environment. settings can be configured for individual radios in their respective radio profiles. This feature allows you to maximize network efficiency in dense RF Radio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. environments by customizing ARM Adaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are allowed ready access. It enables full utilization of the available spectrum to support maximum number of users by intelligently choosing the best RF channel and transmit power for APs in their current RF environment.  settings for individual radios.

The Instant AP automatically checks for CA Certificate Authority or Certification Authority. Entity in a public key infrastructure system that issues certificates to clients. A certificate signing request received by the CA is converted into a certificate when the CA adds a signature generated with a private key. See digital certificate. certificate bundle updates and installs the new version when it is available on Activate.

Instant supports a new payload content called Exposure Notification.

A new configuration command is introduced to allow users to create multiple mesh cluster profiles on an Instant AP and assign a priority to each profile.

A new configuration command is introduced to disable the hard reset to factory default when the AP is operational.

A new CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command is introduced to allow you to enable or disable low power mode settings on an Instant AP.

Two new CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. parameters, valid-ap-max-unseen-timeout and ap-max-unseen-timeout, are introduced in ids command to control the ageout duration of valid and interfering APs. These parameters enable you to effectively control the RF Radio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. environment.

The number of ASCII American Standard Code for Information Interchange. An ASCII code is a numerical representation of a character or an action. characters allowed in the Instant AP hostname is increased to 128 characters.

Instant supports Fast BSS Basic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Transition for WPA3 in both tunnel forwarding and decrypt-tunnel modes.

A new certificate installation method is introduced that enables installation and use of third party certificates for Instant AP applications. This feature is currently supported only in locally managed Instant networks.

Intelligent Thermal Management dynamically adapts operations of the AP to reduce the internal temperature if it exceeds the maximum threshold. This feature is supported in 570 Series, 570EX Series, and AP-518 access points.

The data filter in the Iot transport profile reduces the traffic in the telemetry interfaces. The data filter is a string of numbers that map to the IoT Internet of Things. IoT refers to the internetworking of devices that are embedded with electronics, software, sensors, and network connectivity features allowing data exchange over the Internet. API Application Programming Interface. Refers to a set of functions, procedures, protocols, and tools that enable users to build application software. protobuf fields. Following is the mapping of the data filters and the protobuf fields:

When the meridian asset tracking endpoint is configured and the firmware is upgraded to Instant 8.7.0.0, the CA Certificate Authority or Certification Authority. Entity in a public key infrastructure system that issues certificates to clients. A certificate signing request received by the CA is converted into a certificate when the CA adds a signature generated with a private key. See digital certificate. certificate should be uploaded in order to connect to the meridian server.

Instant now supports an IoT Internet of Things. IoT refers to the internetworking of devices that are embedded with electronics, software, sensors, and network connectivity features allowing data exchange over the Internet. Southbound API Application Programming Interface. Refers to a set of functions, procedures, protocols, and tools that enable users to build application software. that allows interaction with IoT Internet of Things. IoT refers to the internetworking of devices that are embedded with electronics, software, sensors, and network connectivity features allowing data exchange over the Internet. devices and does not require any knowledge of the device by Aruba infrastructure.

Local MPSK operating mode allows you to define up to 24 pre-shared keys per SSID Service Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. on the gateway Gateway is a network node that allows traffic to flow in and out of the network. or the Instant AP without actually requiring an external policy engine like ClearPass Policy Manager.

A new CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command is introduced to configure the 5 GHz Gigahertz. radio used for mesh links in 340 Series and 550 Series access points.

Aruba Instant supports Diffie-Hellman Groups 20 and 21.

Aruba Instant supports Wiliot sensors that provide battery-free BLE Bluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. tags.

UCM is the new service module introduced to manage voice and video call traffic in the AP.

Instant allows you to configure a zigbee service profile and also set it on the Instant AP.

The Aruba 570 Series access points (AP-574, AP-575 and AP-577) are high performance, multi-radio, outdoor access points that can be deployed in either controller-based (ArubaOS) or controller-less (Aruba Instant) network environments. These APs deliver high performance concurrent 2.4 GHz Gigahertz. and 5 GHz Gigahertz. 802.11ax Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. (Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. 6) functionality with MIMO Multiple Input Multiple Output. An antenna technology for wireless communications in which multiple antennas are used at both source (transmitter) and destination (receiver). The antennas at each end of the communications circuit are combined to minimize errors and optimize data speed. radios (2x2 in 2.4 GHz Gigahertz., 4x4 in 5 GHz Gigahertz.), while also supporting 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., and 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band. wireless services.

Additional features include:

• IEEE Institute of Electrical and Electronics Engineers. 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., IEEE Institute of Electrical and Electronics Engineers. 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., IEEE Institute of Electrical and Electronics Engineers. 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band., and IEEE Institute of Electrical and Electronics Engineers. 802.11ax operation as a wireless access point.
• IEEE Institute of Electrical and Electronics Engineers. 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., IEEE Institute of Electrical and Electronics Engineers. 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., IEEE Institute of Electrical and Electronics Engineers. 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band., and IEEE Institute of Electrical and Electronics Engineers. 802.11ax spectrum monitor.
• Mesh mode.
• Two Ethernet Ethernet is a network protocol for data transmission over LAN. ports, ENET0 and ENET1, capable of data rates up to 2.5 Gbps Gigabits per second. and 1 Gbps Gigabits per second. respectively.
• Compatible with IEEE Institute of Electrical and Electronics Engineers. 802.3bt, IEEE Institute of Electrical and Electronics Engineers. 802.3at 802.3at is an IEEE standard for PoE version that supplies up to 25.5W of DC power. See PoE+., and IEEE Institute of Electrical and Electronics Engineers. 802.3af 802.3af is an IEEE standard for Power over Ethernet (PoE) version that supplies up to 15.4W of DC power. See PoE. PoE Power over Ethernet. PoE is a technology for wired Ethernet LANs to carry electric power required for the device in the data cables. The IEEE 802.3af PoE standard provides up to 15.4 W of power on each port. standards on both Ethernet Ethernet is a network protocol for data transmission over LAN. ports.
• Thermal management.

For complete technical details and installation instructions, see Aruba 570 Series Access Points Installation Guide.

The Aruba 570EX Series access points (AP-575EX and AP-577EX) are high performance, multi-radio access points suitable for harsh and hazardous outdoor locations. They can be deployed in either controller-based (ArubaOS) or controller-less (Aruba Instant) network environments. These APs deliver high performance concurrent 2.4 GHz Gigahertz. and 5 GHz Gigahertz. 802.11ax Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. (Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. 6) functionality with MIMO Multiple Input Multiple Output. An antenna technology for wireless communications in which multiple antennas are used at both source (transmitter) and destination (receiver). The antennas at each end of the communications circuit are combined to minimize errors and optimize data speed. radios (2x2 in 2.4 GHz Gigahertz., 4x4 in 5 GHz Gigahertz.), while also supporting 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., and 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band. wireless services.

Additional features include:

• IEEE Institute of Electrical and Electronics Engineers. 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., IEEE Institute of Electrical and Electronics Engineers. 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., IEEE Institute of Electrical and Electronics Engineers. 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band., and IEEE Institute of Electrical and Electronics Engineers. 802.11ax operation as a wireless access point.
• IEEE Institute of Electrical and Electronics Engineers. 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., IEEE Institute of Electrical and Electronics Engineers. 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., IEEE Institute of Electrical and Electronics Engineers. 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band., and IEEE Institute of Electrical and Electronics Engineers. 802.11ax spectrum monitor.
• Mesh mode.
• Two Ethernet Ethernet is a network protocol for data transmission over LAN. ports, ENET0 and ENET1, capable of data rates up to 2.5 Gbps Gigabits per second. and 1 Gbps Gigabits per second. respectively.
• Compatible with IEEE Institute of Electrical and Electronics Engineers. 802.3bt, IEEE Institute of Electrical and Electronics Engineers. 802.3at 802.3at is an IEEE standard for PoE version that supplies up to 25.5W of DC power. See PoE+., and IEEE Institute of Electrical and Electronics Engineers. 802.3af 802.3af is an IEEE standard for Power over Ethernet (PoE) version that supplies up to 15.4W of DC power. See PoE. PoE Power over Ethernet. PoE is a technology for wired Ethernet LANs to carry electric power required for the device in the data cables. The IEEE 802.3af PoE standard provides up to 15.4 W of power on each port. standards on both Ethernet Ethernet is a network protocol for data transmission over LAN. ports.
• Thermal management.

For complete technical details and installation instructions, see Aruba 570EX Series Access Points Installation Guide.

The Aruba AP-505H access points are entry-level, dual-radio wireless AP that can be deployed in either controller-based (ArubaOS) or controller-less (Aruba Instant) network environments. These APs delivers high performance concurrent 2.4 GHz Gigahertz. and 5 GHz Gigahertz. 802.11ax Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. (Wi-Fi Wi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. 6) functionality with 2x2 MU-MIMO Multi-User Multiple-Input Multiple-Output. MU-MIMO is a set of multiple-input and multiple-output technologies for wireless communication, in which users or wireless terminals with one or more antennas communicate with each other. radios, while also supporting 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., and 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band. wireless services.

Additional features include:

• IEEE Institute of Electrical and Electronics Engineers. 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., IEEE Institute of Electrical and Electronics Engineers. 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., IEEE Institute of Electrical and Electronics Engineers. 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band., and IEEE Institute of Electrical and Electronics Engineers. 802.11ax operation as a wireless access point.
• IEEE Institute of Electrical and Electronics Engineers. 802.11a 802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11b 802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., IEEE Institute of Electrical and Electronics Engineers. 802.11g 802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network., IEEE Institute of Electrical and Electronics Engineers. 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz., IEEE Institute of Electrical and Electronics Engineers. 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band., and IEEE Institute of Electrical and Electronics Engineers. 802.11ax spectrum monitor.
• Mesh mode.
• Compatible with IEEE Institute of Electrical and Electronics Engineers. 802.3bt, IEEE Institute of Electrical and Electronics Engineers. 802.3at 802.3at is an IEEE standard for PoE version that supplies up to 25.5W of DC power. See PoE+., and IEEE Institute of Electrical and Electronics Engineers. 802.3af 802.3af is an IEEE standard for Power over Ethernet (PoE) version that supplies up to 15.4W of DC power. See PoE. PoE Power over Ethernet. PoE is a technology for wired Ethernet LANs to carry electric power required for the device in the data cables. The IEEE 802.3af PoE standard provides up to 15.4 W of power on each port. standards.
• One uplink Ethernet Ethernet is a network protocol for data transmission over LAN. port capable of data rates up to 2.5 Gbps Gigabits per second..
• Four downlink Ethernet Ethernet is a network protocol for data transmission over LAN. ports capable of data rates up to 1 Gbps Gigabits per second., including two 802.3at 802.3at is an IEEE standard for PoE version that supplies up to 25.5W of DC power. See PoE+. PoE Power over Ethernet. PoE is a technology for wired Ethernet LANs to carry electric power required for the device in the data cables. The IEEE 802.3af PoE standard provides up to 15.4 W of power on each port. PSE ports for supplying power to downlink devices.
• Integrated BLE Bluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. and Zigbee radios.
• Flexible USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. host interface with 5W power sourcing capability.

For complete technical details and installation instructions, see Aruba AP-505H Access Point Installation Guide.