VPN Pools

The following procedure describes how to create a pool of addresses used by VPN Virtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. clients:

1. In the Managed Network node hierarchy, navigate to Configuration > Services > VPN.
2. Expand the General VP accordion.
3. Click + below the Address Pools table to create a new VPN Virtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. address pool. Configure the following parameters:
   • Pool name—Enter a name to the new pool.
   • Start address IPV4 or V6—Enter the IP address at the start of the range of addresses.
   • End address IPV4 or V6—Enter the IP address at the end of the range of addresses.
4. Click Submit.
5. Click Pending Changes.
6. In the Pending Changes window, select the check-box and click Deploy Changes.