ap-name

ap-name <profile-name>

ap-location-profile

airslice-profile <name>

am-filter-profile {default | <profile-name>}

ap-multizone-profile {default | <profile-name>}

ap-system-profile {default | <profile-name>}

authorization-profile {default | <profile-name>}

clone {default | <source>}

dot11-60GHz-radio-profile {default | <profile-name>}

dot11-6GHz-radio-profile {default | <profile-name>}

dot11a-radio-profile {default | <profile-name>}

dot11a-secondary-radio-profile {default | <profile-name>}

dot11a-traffic-mgmt-profile {default | <profile-name>}

dot11g-radio-profile {default | <profile-name>}

dot11g-traffic-mgmt-profile {default | <profile-name>}

enet0-profile {default | <profile-name>}

enet1-profile {default | <profile-name>}

enet2-profile {default | <profile-name>}

enet3-profile {default | <profile-name>}

enet4-profile {default | <profile-name>}

event-thresholds-profile {default | <profile-name>}

exclude-mesh-cluster-profile-ap {default | <profile-name>}

exclude-virtual-ap {default | <profile-name>}

exclude-wifi-uplink-profile {default | <profile-name>}

gps-service-profile {default | <profile-name>}

ids-profile {default | <profile-name>}

iot radio-profile <profile-name>

mesh-accesslist-profile {default | <profile-name>}

mesh-cluster-profile {default | <mesh-cluster-profile>} priority <priority>

mesh-radio-profile {default | <profile-name>}

no

regulatory-domain-profile {default | <profile-name>}

regulatory-domain-profile {default | <profile-name>}

rf-optimization-profile {default | <profile-name>}

usb-profile {default | <profile-name>}

virtual-ap {default | <profile-name>}

wifi-uplink-profile {default | <profile-name>}

zigbee service-profile <profile-name>

ap location profile

Description

This command configures a specific AP. Profiles that are applied to an AP group can be overridden on a per-AP name basis, and virtual APs can be added or excluded on a per-AP name basis. If a particular profile is overridden for an AP, all parameters from the overriding profile are used. There is no merging of individual parameters between the AP and the AP group to which the AP belongs.

Parameter

Description

ap-name <profile-name>

Configures an AP name. Give a name that identifies the AP. By default, the name of an AP can either be its Ethernet MAC address, or if the AP has been previously provisioned with an earlier version of AOS, a name in the format <building>.<floor>.<location>. The name must be 1–63 characters long.

NOTE: You cannot use quotes (“) in the AP name.

ap-location-profile

This parameter is used to indicate AP location-profile to be applied for the AP name.

airslice-profile <name>

Configures an Air Slice profile.

 

am-filter-profile

<profile-name>

Configures AM filter profile.

am-multizone-profile

<profile-name>

Configures AP MultiZone profile.

ap-system-profile

<profile-name>

Configures AP administrative operations, such as logging levels. See ap system-profile on page 1.

authorization-profile

<profile-name>

Restrictive group for unauthorized AP.

clone <source>

Name of an existing AP name from which profile names are copied.

dot11-60GHz-radio-profile

<profile-name>

Configures 802.11 60GHz radio settings for the AP group; contains the ARM profile.

dot11-6GHz-radio-profile

<profile-name>

Configures 802.11 6GHz radio settings for the AP group; contains the ARM profile.

dot11a-radio-profile

<profile-name>

Configures 802.11a radio settings for the AP group; contains the ARM profile. See rf dot11a-radio-profile on page 1.

dot11a-secondary-radio-profile

<profile-name>

Configures 802.11a secondary radio settings for the AP group; contains the ARM profile.

dot11a-traffic-mgmt-profile

<profile-name>

Configures bandwidth allocation. See wlan traffic-management-profile on page 1.

dot11g-radio-profile

<profile-name>

Configures 802.11g radio settings for the AP group; contains the ARM profile. See rf dot11g-radio-profile on page 1.

dot11g-traffic-mgmt-profile

<profile-name>

Configures bandwidth allocation. See wlan traffic-management-profile on page 1.

enet0-profile

<profile-name>

Configures the duplex and speed of the Ethernet 0 interface on the AP. See ap enet-link-profile on page 1.

enet1-profile

<profile-name>

Configures the duplex and speed of the Ethernet 1 interface on the AP. See ap enet-link-profile on page 1.

enet2-profile

<profile-name>

Configures the duplex and speed of the Ethernet 2 interface on the AP. See ap enet-link-profile on page 1.

enet3-profile

<profile-name>

Configures the duplex and speed of the Ethernet 3 interface on the AP. See ap enet-link-profile on page 1.

enet4-profile

<profile-name>

Configures the duplex and speed of the Ethernet 4 interface on the AP. See ap enet-link-profile on page 1.

event-thresholds-profile

<profile-name>

Configures Received Signal Strength Indication (RSSI) metrics. See rf event-thresholds-profile on page 1.

exclude-mesh-cluster-profile-ap <profile-name>

Excludes the specified mesh cluster profile from this AP.

The Secure Enterprise Mesh license must be installed.

exclude-virtual-ap

<profile-name>

Excludes the specified virtual AP profiles from this AP.

exclude-wifi-uplink-profile

<profile-name>

Excludes the specified Wi-Fi uplink profiles from this AP.

gps-service-profile

<profile-name>

Configures GPS service profile.

ids-profile

<profile-name>

Configures HPE Aruba Networking’s IDS. See ids profile on page 1.

iot

<profile-name>

Applies iot related profile.

mesh-accesslist-profile

Configures the mesh access list profile.

mesh-cluster-profile

<profile-name>

Configures the mesh cluster profile for the AP (mesh node). There is a “default” mesh cluster profile; however, it is not applied until you provision the mesh node. See ap mesh-cluster-profile on page 1.

The Secure Enterprise Mesh license must be installed.

priority <priority>

Configures the priority of the mesh cluster profile. If more than two mesh cluster profiles are configured, mesh points use this number to identify primary and backup profile(s).

The supported range of values is 1–16. The lower the number, the higher the priority.

Default: 1

mesh-radio-profile

<profile-name>

Configures the 802.11g and 802.11a radio settings for the AP (mesh node). See ap mesh-ht-ssid-profile on page 1.

The Secure Enterprise Mesh license must be installed.

no

Negates any configured parameter.

regulatory-domain-profile

<profile-name>

Configures the country code and valid channels. See ap regulatory-domain-profile on page 1.

rf-optimization-profile

<profile-name>

Configures load balancing and coverage hole and interference detection. See rf optimization-profile on page 1.

usb-profile <profile-name>

Configures USB profile.

virtual-ap <profile-name>

One or more profiles, each of which configures a specified WLAN. See wlan virtual-ap on page 1.

wifi-uplink-profile <profile-name>

Configures Wi-Fi uplink profile.

zigbee service-profile <profile-name>

Apply zigbee related profile.

Example

The following command excludes a virtual AP profile from a specific AP:

(host) [mynode] (config) #ap-name 00:0b:86:c0:cf:d8

(host) [mynode] (AP name "00:0b:86:c0:cf:d") #exclude-virtual-ap corpnet

Related Command

Command

Description

show ap-name

To view the AP settings.

Command History:

Release

Modification

AOS 8.12.0.0
  • The ap location profile parameter was added.
  • The airslice-profile parameter was removed.

AOS 8.7.0.0

The following parameters were introduced:

  • airslice-profile
  • mesh-accesslist-profile

AOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Conductor.