ids profile
ids profile <profile-name>
clone <source>
dos-profile <profile-name>
general-profile <profile-name>
impersonation-profile <profile-name>
no
signature-matching-profile <profile-name>
unauthorized-device-profile <profile-name>
Description
This command defines a set of IDS profiles that you can then apply to an AP group (with the ap-group command) or to a specific AP (with the ap-name command).
|
Parameter |
Description |
|
<profile-name> |
Name that identifies an instance of the profile. The name must be 1-63 characters. "default" |
|
clone <source> |
Name of an existing IDS profile from which parameter values are copied. |
|
dos-profile <profile-name> |
Name of a IDS DoS profile to be applied to the AP group or name. See ids dos-profile on page 1. "default" |
|
general-profile <profile-name> |
Name of an IDS general profile to be applied to the AP group or name. See ids general-profile on page 1. "default" |
|
impersonation-profile <profile-name> |
Name of an IDS impersonation profile to be applied to the AP group or name. See ids impersonation-profile on page 1. "default" |
|
no |
Negates any configured parameter. |
|
signature-matching-profile <profile-name> |
Name of an IDS signature matching profile to be applied to the AP group or name. See ids signature-matching-profile on page 1 "default" |
|
unauthorized-device-profile <profile-name> |
Name of an IDS unauthorized device profile to be applied to the AP group or name. See ids unauthorized-device-profile on page 1. "default" |
Example
The following command defines a set of IDS profiles:
(host) [mynode] (config) #ids profile floor2
(host) [mynode] (IDS Profile "floor2") #dos-profile dos1
general-profile general1
impersonation-profile mitm1
signature-matching-profile sig1
unauthorized-device-profile unauth1
Related Commands
|
Command |
Description |
|
Configures an IDS DoS profile. |
|
|
Configures an IDS general profile. |
|
|
Configures an IDS impersonation profile. |
|
|
Configures an IDS signature matching profile. |
|
|
Configures an IDS unauthorized device profile. |
|
|
Displays all IDS profiles or a specific IDS profile. |
Command History
|
Release |
Description |
|
AOS 8.0.0.0 |
Command introduced. |
Command Information
|
Platforms |
License |
Command Mode |
|
All platforms |
Requires the RFprotect license. |
Config mode on Mobility Conductor. |