lc-cluster initiate schedule upgrade

lc-cluster initiate schedule upgrade

version <version_string>

<year> <month> <day> <hh> <mm> <ss>

max-downloads <ap_preload_batch_size>

partition <partition_id>

Description

This command is used to schedule a cluster upgrade.

Parameter	Description
version	The version to which the cluster will get upgraded to.
year	Year of the upgrade
month	Month of the upgrade
day	Day of the upgrade
hh	Hour of the upgrade
mm	Minutes of the upgrade
ss	Seconds of the upgrade
max-downloads <ap_preload_batch_size>	Maximum number of simultaneous APs doing image preload. The default is 100 per AAC.
partition <partition_id>	The partition on the managed device to which the new image is to be copied, valid values are 0 or 1 and this is optional. If the partition is not specified, it will automatically pick the alternate boot partition.

Example

The following command schedules a cluster upgrade:

Related Commands

Command	Description
lc-cluster initiate abort	This command is used to delete or abort a scheduled cluster upgrade.
lc-cluster initiate re-schedule upgrade	This command is used to reschedule a scheduled cluster upgrade.
show lc-cluster	Displays information related to vlan, membership, profile, heartbeat, status of the scheduled upgrades and so on for a cluster.
upgrade managed-devices	This command upgrades the managed devices with the respective options provided in the input, like using different protocol options as well as loading at different node levels and paths, and also can upgrade the single managed device based on the MAC address of the device.

Command History

Release	Modification
AOS 8.4.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All Platforms	Base operating system.	Config mode on Mobility Conductor.