show ap monitor ap-list

ap-name <ap-name> {containment-exclusion} | {wifi-direct [ all ]} | {verbose}

bssid <bssid>

ip-addr <ip-addr>

ip6-addr <ip6-addr>

Description

This command shows the list of APs being monitored.

Parameter	Description
ap-name <ap-name>	Shows data for an AM with a specific name.
containment-exclusion	Shows details of vendor specific IE information for containment exclusion.
verbose	Shows additional information about flags and the flag, W is displayed to identify the Wi-Fi direct devices. This flag will be displayed only if the detection of WIFI-Direct P2P groups is enabled in the IDS unauthorized device profile.
bssid <bssid>	Shows data for an AM with a specific BSSID. The BSSID is usually the AM’s MAC address.
ip-addr <ip-addr>	Shows data for an AM with a specific IPv4 address by entering its IPv4 address in dotted-decimal format.
ip6-addr <ip6-addr>	Shows data for an AM with a specific IPv6 address by entering its IPv6 address in dotted-decimal format.

Example

The following example displays the Monitored AP table, which lists all the APs monitored by a specified AP or BSSID (For versions prior to AOS 8.9.0.0).

(host) #show ap monitor ap-list ap-name al12 Monitored AP Table ------------------ bssid essid chan ap-type phy-type dos dt/mt ut/it ----- ----- ---- ------- -------- --- ----- ----- 24:de:c6:be:c3:fa bridge-85 161 interfering 80211a-HT-40 disable 33633/17957 0/0 24:de:c6:8e:aa:86 ap214-tb2-%apprf% 11 interfering 80211b/g-HT-20 disable 33633/33633 0/0 24:de:c6:be:b7:3a bridge-85 64 interfering 80211a-HT-40 disable 33633/17065 8/4 encr nstas avg-snr curr-snr avg-rssi curr-rssi wmacs ibss cl-delay bss-color partial bss color bss color disabled ---- ----- ------- -------- -------- --------- ----- ---- --------- ------ ----------------- ------------------ wpa2-psk-aes 0 37 37 57 58 0 no 0 3 false false open 0 53 55 41 40 0 no 0 3 false false wpa2-psk-aes 0 45 45 49 50 0 no 0 59 false false

The following example displays the Monitored AP table, which lists all the APs monitored by a specified AP or BSSID (AOS 8.9.0.0 or later versions).

(host) #show ap monitor ap-list ap-name hhm-635

Monitored AP Table ------------------ bssid essid band/chan/ch-width/ht-type 6GHz capable ap-type dos dt/mt ut/it encr nstas avg-snr curr-snr avg-rssi curr-rssi wmacs ibss cl-delay bss-color partial bss color bss color disabled ----- ----- -------------------------- ------------ ------- --- ----- ----- ---- ----- ------- -------- -------- --------- ----- ---- -------- --------- ----------------- ------------------ cc:88:c7:41:64:60 8@hhm-635-psk 6GHz/37S/160MHz/HE yes valid disable 781198/781198 0/0 wpa3-sae-aes 0 25 25 70 70 0 no 0 14 false false 1c:28:af:68:1f:f0 6GHz_DUT 6GHz/49E/80MHz/HE yes interfering disable 781185/124537 3/0 wpa3-sae-aes 0 24 25 70 70 0 no 0 35 false false 1c:28:af:67:ef:60 zz-635-wpa3-owe 6GHz/1E/80MHz/HE yes interfering disable 374985/1926 103/0 wpa3-owe-aes 0 0 8 0 87 0 no 0 56 false false 1c:28:af:68:66:40 11 6GHz/37+/40MHz/HE yes interfering disable 270423/157932 0/0 wpa3-sae-aes 0 30 32 64 63 0 no 0 29 false false 1c:28:af:68:40:33 000-owe-6g 6GHz/37+/40MHz/HE yes interfering disable 161381/161381 0/0 wpa3-owe-aes 0 25 26 69 69 0 no 0 23 false false 1c:28:af:68:66:41(*) 060606 6GHz/37+/40MHz/HE yes interfering disable 124188/124188 124188/0 wpa3-sae-aes 0 0 0 0 0 0 no 0 29 false false 1c:28:af:68:40:34(*) 000-non-cnsa-6g 6GHz/37+/40MHz/HE yes interfering disable 92522/92522 92522/0 wpa3-other-gcm256 0 0 0 0 0 0 no 0 23 false false 1c:28:af:68:40:36(*) 000-cnsa-6g 6GHz/37+/40MHz/HE yes interfering disable 92521/92521 92521/0 wpa3-other-gcm256 0 0 26 0 69 0 no 0 23 false false 1c:28:af:68:28:c0 jiyong-remote 6GHz/37+/40MHz/HE yes interfering disable 27207/27207 0/0 wpa3-sae-aes 0 8 9 86 86 0 no 0 56 false false 1c:28:af:68:55:c0 ethersphere-arubaos-6g 6GHz/197E/80MHz/HE yes interfering disable 26999/8500 13/4 wpa3-sae-aes 0 6 7 89 88 0 no 0 2 false false cc:88:c7:41:25:30 6GHz/85/20MHz/non-HT yes interfering disable 962/134 962/134 unknown 0 0 0 0 0 0 no 0 --- --- --- Start:0 Length:11 Total:11 Current max monitor size:2048 (*): Non-transmitted BSSID

The output of this command includes the following parameters:

Parameter	Description
bssid	BSSID of an AP. This is usually the AP’s MAC address.
essid	ESSID that names a wireless network.
chan (For versions prior to AOS 8.9.0.0)	Radio channel used by the BSSID.
band/chan/ch-width/ht-type (AOS 8.9.0.0 or later versions)	The AP radio type displayed as radio band/channel number/channel bandwidth/throughput type.
6Ghz capable (AOS 8.9.0.0 or later versions)	Shows whether the AP supports 6 GHz radio band.
ap-type	Shows classification of the AP.
phy-type (For versions prior to AOS 8.9.0.0)	Radio PHY type. Possible types include: 802.11a 802.11a-HT-40 802.11b/g 802.11b/g-HT-20
dos	Shows if the feature to contain DoS attacks has been enabled or disabled.
dt/mt	dt: Detected time: the number of timer ticks since the AP was last detected. mt: Monitor time; the number of elapsed timer ticks since the AP first recognized the monitored AP.
ut/it	ut: Unseen time: the number elapsed timer ticks the monitored AP was not seen when scanning a channel of the device. it: AP idle time, the number of timer ticks since the AP last saw any frames from the monitored AP.
encr	Shows the encryption type of the BSSID. If there are multiple encryption types, this command shows the lowest encryption type.
nstas	Shows the number of stations connected to the AP (as seen by the monitoring AP).
avg-snr	Shows the average SNR.
curr-snr	Shows the current SNR.
avg-rssi	Shows the average RSSI for the device. NOTE: RSSI is an indication of the power level being received by the antenna. Therefore, the higher the RSSI number, the stronger the signal.
curr-rssi	Shows the current RSSI for the device.
wmacs	Shows the number of unique wireless MAC addresses seen on the Wi-Fi network from the AP's BSSID.
ibss	Shows all the monitored APs (BSSIDs).
cl-delay	Shows the delay in classification of each device. NOTE: The maximum delay for clients is not displayed if the `unclass_sta_update` parameter is not enabled.
bss-color	Shows the bss color selected. Range: 1-63
partial bss color	Shows if it is partial bss enabled.
bss color disabled	Shows if the bss color configuration is disabled.

The following example displays all the WIFI-Direct devices detected by a specified AP.

(host) #show ap monitor ap-list ap-name 635-ac wifi-direct all WIFI Direct Devices ------------------- BSSID SSID GO assoc cli Dev Caps Grp Caps Rap Type DOS Hosted ----- ----- -- --------- -------- -------- -------- --- ------

18:60:24:36:8f:e1 DIRECT-E0-HP OfficeJet 4650 yes 0 0x05 0x01 interfering no no

28:3b:82:cc:49:f6 Hevnoraak's Mind yes 1 0x25 0xAB interfering no no

The following example displays the details of vendor specific IE information for containment exclusion.

(host) #(mynode) #show ap monitor ap-list ap-name 655-ee containment-exclusion

AP Containment Exemption

------------------------

bssid ssid ap-type exemption-rule-index exemption-rule-criteria

----- ---- ------- -------------------- -----------------------

34:8a:12:f7:b6:c0 S28_AP655 interfering 1 8C:FD:F0 4

cc:88:c7:41:83:40 S06_Test interfering 1 8C:FD:F0 4

cc:88:c7:41:75:a0 S20_6ghz valid 1 8C:FD:F0 4

cc:88:c7:41:83:41 S06-US-5Ghz-24Ghz interfering 1 8C:FD:F0 4

00:5f:67:5a:d3:8a Deco_Competitive_Lab interfering 1 8C:FD:F0 4

06:5f:67:5a:d3:8a interfering 1 8C:FD:F0 4

06:5f:67:5a:d3:8b interfering 1 8C:FD:F0 4

00:5f:67:5a:d3:8b Deco_Competitive_Lab interfering 1 8C:FD:F0 4

cc:88:c7:41:95:80 S06-US-6Ghz-only interfering 1 8C:FD:F0 4

cc:88:c7:41:83:20 S06-US-6Ghz-only interfering 1 8C:FD:F0 4

34:8a:12:f8:15:20 S06-US-6Ghz-only interfering 1 8C:FD:F0 4

cc:88:c7:41:95:a0 S06_Test interfering 1 8C:FD:F0 4

cc:88:c7:41:95:a1 S06-US-5Ghz-24Ghz interfering 1 8C:FD:F0 4

00:5f:67:72:15:0c tp-link_Omada interfering 1 8C:FD:F0 4

34:8a:12:f7:b6:d0 S28_AP655 interfering 1 8C:FD:F0 4

d0:4d:c6:b6:93:e0 valid 1 8C:FD:F0 4

Related Command

Command	Description
show ap monitor debug	This command shows information for an Air Monitor’s current status, message counters, or profile settings.

Command History

Release	Modification
AOS 8.11.1.0	A new sub-parameter, verbose was added to the show ap monitor ap-list ap-name <ap-name> command.
AOS 8.11.0.0	The `containment-exclusion and wifi-direct[ all ]` sub-parameters were introduced.
AOS 8.9.0.0	The command output was modified to include the following: Removed `chan` and `phy-type` parameters. Added `band/chan/ch-width/ht-type` and `6Ghz capable` parameters.
AOS 8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Enable or Config mode on Mobility Conductor.