show ap mesh-cluster-profile [<profile>]
Description
This command shows configuration settings for a mesh cluster profile. The command show ap mesh-cluster-profile displays a list of all mesh cluster profiles configured on the Mobility Conductor, including the number of references to each profile and each profile’s status. Include the optional <profile> parameter to show detailed settings for an individual mesh cluster profile.
|
Parameter |
Description |
|
<profile> |
Name of a mesh cluster profile |
Examples
The example below shows the configuration settings for the mesh cluster profile “meshcluster2”.
(host)[mynode] #show ap mesh-cluster-profile meshcluster2
Mesh Cluster profile "meshcluster2"
------------------------------
Parameter Value
--------- -----
Cluster Name company-mesh
RF Band a
Encryption opensystem
WPA Hexkey N/A
WPA Passphrase N/A
The output of this command includes the following information:
|
Parameter |
Description |
|
Cluster Name |
Name of the mesh cluster using this profile |
|
RF band |
The RF band in which the AP should operate: g = 2.4 GHz a = 5 GHz |
|
Encryption |
Data encryption setting for the mesh cluster profile. opensystem—No authentication and encryption. wpa2-psk-aes—WPA2 with AES encryption using a preshared key. |
|
WPA Hexkey |
The WPA PSK (only for mesh cluster profiles using WPA2 with AES encryption). |
|
WPA Passphrase |
The WPA password that generates the preshared key (only for mesh cluster profiles using WPA2 with AES encryption). |
Related Commands
|
Command |
Description |
|
This command configures a mesh cluster profile used by mesh nodes. |
Command History
|
Release |
Modification |
|
AOS 8.0.0.0 |
Command introduced. |
Command Information
|
Platforms |
License |
Command Mode |
|
All platforms |
This show command is available in the base operating system. Commands to configure the mesh feature require the Mesh license. |
Enable or Config mode on managed devices. |
