show lc-cluster
bucket [distribution {all|essid <essid-name>}]
bucketmap [publish {counters}]
exclude-vlan
global-events
group-membership
group-profile
gsm counters
heartbeat counters
history
load distribution
papi counters
upgrade
scheduled-upgrades
vlan-probe status
<profile> {ap|controller|upgrade}
Description
Displays information related to vlan, membership, profile, heartbeat, and so on for a cluster. The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLI command. The | redirect-output modifier helps you redirect the command output.
|
Parameter |
Description |
|
bucket distribution all |
Displays the current bucket distribution for all the ESSIDs. |
|
bucket distribution essid <essid-name> |
Displays the current bucket distribution for a specific ESSID. |
|
bucketmap publish counters |
Displays the details of the published bucketmap counters. |
|
exclude-vlan |
Displays a list containing vlans excluded from L2 Probing. |
|
global-events |
Displays cluster events. |
|
group-membership |
Displays the active cluster member of cluster profile |
|
group-profile |
Displays the cluster profile |
|
gsm counters |
Displays the counters pertaining to various GSM events |
|
heartbeat counters |
Displays the peer disconnection events statistics. |
|
history |
Displays cluster history. |
|
load distribution |
Displays the current load distribution |
|
ap |
Displays the current load distribution on the AP |
|
client |
Displays the current load distribution on the client |
|
papi |
Displays the cluster messaging related counters. |
|
vlan-probe status |
Displays the Cluster VLAN Probe information. |
|
<profile> |
Displays the name of the cluster profile. |
|
ap {details} |
Displays the details of the APs in the cluster. |
|
controller {details|ip|ipv6} |
Displays the controllers details in the cluster. Use one of the following parameters:
|
|
upgrade |
Displays the upgrade details of controllers and APs in the cluster. Use one of the following parameters:
|
|
rap-public-ip |
Displays the public IP address of the Remote AP cluster configured behind NAT. |
|
scheduled-upgrades |
Displays the status of all the clusters scheduled for an upgrade. |
Example
An example output of the show lc-cluster group-membership command for a cluster running AOS 8.11.0.0 or later versions.
Cluster Enabled, Profile Name = "test4nodecluster"
Redundancy Mode On
Active AP Load Balancing:YES
Active AP Rebalance Threshold:20%
Active AP Unbalanced Threshold:5%
Active AP Rebalance Count:50
Active AP Rebalance Timer:1 mins
Starting VRRP ID:99
VRRP Passphrase:********
Cluster Info Table
------------------
Type IPv4 Address Priority Connection-Type STATUS
---- --------------- -------- --------------- ------
peer 10.17.65.34 128 L2-Connected CONNECTED (Leader, last HBT_RSP 11
self 10.17.65.35 128 N/A CONNECTED (Member) peer 10.17.65.36 128 N/A INCOMPATIBLE (BUILD_STRING_MISMATCH)
peer 10.17.65.37 128 N/A INCOMPATIBLE (BUILD_STRING_MISMATCH)
peer 10.17.65.38 128 N/A INCOMPATIBLE (BUILD_STRING_MISMATCH)
An example output of the show lc-cluster group-membership command for a cluster running AOS 8.10.0.0 or older versions.
Cluster Enabled, Profile Name = "test4nodecluster"
Redundancy Mode On
Active Client Rebalance Threshold:20%
Standby Client Rebalance Threshold:40%
Unbalance Threshold:5%
Active AP Load Balancing:YES
Active AP Rebalance Threshold:20%
Active AP Unbalanced Threshold:5%
Active AP Rebalance Count:50
Active AP Rebalance Timer:1 mins
Starting VRRP ID:99
VRRP Passphrase:********
Cluster Info Table
------------------
Type IPv4 Address Priority Connection-Type STATUS
---- --------------- -------- --------------- ------
peer 10.17.65.34 128 L2-Connected CONNECTED (Leader, last HBT_RSP 11
self 10.17.65.35 128 N/A CONNECTED (Member) peer 10.17.65.36 128 N/A INCOMPATIBLE (BUILD_STRING_MISMATCH)
peer 10.17.65.37 128 N/A INCOMPATIBLE (BUILD_STRING_MISMATCH)
peer 10.17.65.38 128 N/A INCOMPATIBLE (BUILD_STRING_MISMATCH)
An example output of the show lc-cluster exclude-vlan command.
#show lc-cluster exclude-vlan
---------------------------
VLANs excluded from probing
---------------------------
1
An example output of the show lc-cluster group-profile
#show lc-cluster group-profile cluster_test
IPv4 Cluster Members
--------------------
CONTROLLER-IP PRIORITY MCAST-VLAN VRRP-IP VRRP-VLAN VRRP-VLAN GROUP-ID RAP-PUBLIC-IP
------------- -------- ---------- ------- --------- --------- --------- ---------
10.17.65.34 128 0 0.0.0.0 0 200 0 10.10.10.11
10.17.65.35 128 0 0.0.0.0 0 200 0 10.10.10.12
Redundancy:Yes
An example output of the show lc-cluster group-profile for a cluster running AOS 8.10.0.0 or older versions.
#show lc-cluster group-profile cluster_test
IPv4 Cluster Members
--------------------
CONTROLLER-IP PRIORITY MCAST-VLAN VRRP-IP VRRP-VLAN VRRP-VLAN GROUP-ID RAP-PUBLIC-IP
------------- -------- ---------- ------- --------- --------- --------- ---------
10.17.65.34 128 0 0.0.0.0 0 200 0 10.10.10.11
10.17.65.35 128 0 0.0.0.0 0 200 0 10.10.10.12
Redundancy:Yes
Active Client Rebalance Threshold:20%
Standby Client Rebalance Threshold:45%
Unbalance Threshold:5%
An example output of the show lc-cluster gsm command.
#show lc-cluster gsm counters
Cluster GSM Channel Counters
----------------------------
STA Channel: Adds >> 0
STA Channel: Deletes >> 0
STA Channel: Activates >> 0
STA Channel: Deactive and Dormant Deletes >> 0
Cluster STA Channel: Dormant Adds >> 0
Cluster STA Channel: Dormant Deletes >> 0
Cluster STA Channel: Dormant Section Update >> 0
Cluster STA Channel: Section Update >> 0
Cluster STA Channel: STA not found during Dormant Section Update >> 0
Cluster STA Channel: STA not found during Section Update >> 0
AP Channel: Adds >> 0
AP Channel: Deletes >> 0
Cluster AP Channel: Dormant Adds >> 0
Cluster AP Channel: Deactivates >> 0
Cluster AP Channel: Dormant Deletes >> 0
BSS Channel: Adds >> 0
BSS Channel: Deletes >> 0
BSS Channel: Section Update >> 0
BSS Channel: BSS not found during Section Update >> 0
Cluster BSS Channel: Dormant Adds >> 0
Cluster BSS Channel: Deactivates >> 0
Cluster BSS Channel: Dormant Deletes >> 0
An example output of the show lc-cluster heartbeat command.
#show lc-cluster heartbeat counters
Cluster Heartbeat Counters
--------------------------
IPv4 Address RES RSR MIS HMPD LMRPD IDPD CPDPD CDPD LMHINT LTOD
--------------- -------- -------- ----- ----- ----- ----- ----- ---- ------ ------------------------
10.17.65.34 28147 28147 0 61 0 0 0 0 376 Thu Jun 16 23:53:48 2016
10.17.65.36 0 0 0 0 0 0 0 0 0
10.17.65.37 0 0 0 0 0 0 0 0 0
10.17.65.38 0 0 0 0 0 0 0 0 0
-----------PREAMBLE-----------------
RES - REQ SENT
RSR - RSP RCVD
MIS - MISSES
HMPD - HBT MISS PEER DEAD
LMRPD - LINK MAP RCVD PEER DEAD
IDPD - IPSEC DOWN PEER DEAD
An example output of the show lc-cluster papi command.
#show lc-cluster papi counters
Cluster PAPI Counters
---------------------
RX STM UP >> 1
RX STM DOWN >> 1
RX AUTH UP >> 0
RX AUTH DOWN >> 0
RX ISAKMPD UP >> 0
RX ISAKMPD DOWN >> 0
RX DDS UP >> 0
RX DDS DOWN >> 0
TX SOS CLUSTER ENABLE SUCCESS >> 2
TX SOS CLUSTER ENABLE FAIL >> 0
TX SOS CLUSTER DISABLE SUCCESS >> 1
TX SOS CLUSTER DISABLE FAIL >> 0
TX SOS CLUSTER PEER ADD SUCCESS >> 127
TX SOS CLUSTER PEER ADD FAIL >> 0
TX SOS CLUSTER PEER DEL SUCCESS >> 0
TX SOS CLUSTER PEER DEL FAIL >> 0
An example output of the show lc-cluster load command.
#show lc-cluster load distribution ap
Cluster Load Distribution for APs
---------------------------------
Type IPv4 Address Active APs Standby APs
---- --------------- -------------- ---------------
self 10.15.146.3 3 3
peer 10.15.146.4 1 3
peer 10.15.146.5 1 0
peer 10.15.146.6 1 0
Total: Active APs 6 Standby APs 6
#show lc-cluster load distribution client
Cluster Load Distribution for Clients
-------------------------------------
Type IPv4 Address Active Clients Standby Clients
---- --------------- -------------- ---------------
self 10.15.146.3 0 0
peer 10.15.146.4 0 1
peer 10.15.146.5 0 0
peer 10.15.146.6 1 0
Total: Active Clients 1 Standby Clients 1
An example output of the show lc-cluster vlan-probe command.
#show lc-cluster vlan-probe status
Cluster VLAN Probe Status
-------------------------
Type IPv4 Address REQ-SENT REQ-FAIL ACK-SENT ACK-FAIL REQ-RCVD ACK-RCVD VLAN_FAIL CONN-TYPE START/STOP
---- --------------- -------- -------- -------- -------- -------- -------- --------- --------- ----------
peer 10.17.65.34 248 0 372 0 372 248 0 L2 Conn 5/ 5
peer 10.17.65.36 0 0 0 0 0 0 0 N/A 0/ 49
peer 10.17.65.37 0 0 0 0 0 0 0 N/A 0/ 49
peer 10.17.65.38 0 0 0 0 0 0 0 N/A 0/ 49
An example output of the show lc-cluster scheduled-upgrades command.
show lc-cluster scheduled-upgrades
Cluster Scheduled Upgrade Status
--------------------------------
Profile To Version Partition ID AP Preload size Scheduled Time MD Timezone
------- ---------- ------------ --------------- -------------------------
v4 8.4.0.0-mm-dev_65200 Default 100 Fri Jun 8 15:00:00 2018 Asia/Tokyo
An example output of the show lc-cluster bucket distribution all command.
#show lc-cluster bucket distribution all Cluster Load Distribution for bucketmap --------------------------------------- Type IPv4 Address Active Buckets Standby Buckets Ideal Active Buckets Ideal Standby Buckets ---- --------------- -------------- --------------- -------------------- --------------------- ESSID AP_groupapsim300-PEAP peer 192.168.192.8 43 43 43 43 peer 192.168.192.2 43 43 43 43 self 192.168.192.1 43 43 43 43 peer 192.168.192.7 43 43 43 43 peer 192.168.192.4 42 42 42 42 peer 192.168.192.3 42 42 42 42 (Node1) #
An example output of the show lc-cluster bucket distribution essid <essid-name> command.
#show lc-cluster bucket distribution essid AP_groupapsim300-PEAP Cluster Load Distribution for bucketmap --------------------------------------- Type IPv4 Address Active Buckets Standby Buckets Ideal Active Buckets Ideal Standby Buckets ---- --------------- -------------- --------------- -------------------- --------------------- ESSID AP_groupapsim300-PEAP peer 192.168.192.8 43 43 43 43 peer 192.168.192.2 43 43 43 43 self 192.168.192.1 43 43 43 43 peer 192.168.192.7 43 43 43 43 peer 192.168.192.4 42 42 42 42 peer 192.168.192.3 42 42 42 42
An example output of the show lc-cluster bucketmap publish counters command.
#show lc-cluster bucketmap publish counters Cluster Bucket Map Publish Counters ----------------------------------- Bmap publish: JOIN >> 2 Bmap publish: Isolate Leader >> 1 Bmap publish: Prepare A-UAC periodic rebalance >> 18 Bmap publish: S-UAC->A-UAC move >> 22 Bmap publish: S-UAC Assign >> 22
Related Commands
|
Command |
Description |
|
This command is used to configure the cluster group profile in the Mobility Conductor. |
|
|
This command configures the group-membership in each node. This command is used to enable the cluster membership on the managed devices. |
|
|
This show command displays heartbeat threshold values, datapath assignments, number of peers and peer data statistics. |
|
|
This command displays information related to cluster heartbeat counters. |
|
|
This command displays the history of the connection and disconnection events with a reason and the time stamp. |
Command History
|
Release |
Modification |
|
AOS 8.11.0.0 |
The following changes were introduced: The active-client-rebalance-threshold, standby-client-rebalance-threshold, and unbalance-threshold fields were removed from the output of the The bucket distribution all, bucket distribution essid <essid-name>, and bucketmap publish counters parameters were added. |
|
AOS 8.7.0.0 |
The functionality of |
|
AOS 8.5.0.0 |
The load balance thresholds were updated in the output and the Starting VRRP ID and VRRP Passphrase fields are added in the output. |
|
AOS 8.4.0.0 |
The parameter |
|
AOS 8.2.0.0 |
The parameter details of |
|
AOS 8.0.0.0 |
Command introduced. |
Command Information
|
Platforms |
License |
Command Mode |
|
All platforms |
Base operating system. |
Config mode or enable mode in the managed device. |
