show log arm

show log arm

Description

Show the controller’s ARM logs.

Parameter

Description

<number>

Start displaying the log output from the specified number of lines from the end of the log.

all

Shows all the ARM user debug logs for the controller.

Example

This example shows the controller’s ARM process log.

(host)[node] #show log arm all

Oct 15 23:23:38 ARM Process[6250]: <703004> <6250> <WARN> |ARM Process| set_amon_switch_ip: changing amon switch ip addr to 10.17.24.43

Oct 15 23:23:38 ARM Process[6250]: <703004> <6250> <WARN> |ARM Process| arm_process_service_ctrl_info_channel_events: Configured controller address ipv6 :: ipv4 10.17.24.43 service 0.0.0.0

Oct 15 23:23:38 ARM Process[6250]: <703004> <7730> <WARN> |ARM Process| set_amon_switch_ip: changing amon switch ip addr to 10.17.24.43

Oct 15 23:23:38 ARM Process[6250]: <703004> <7730> <WARN> |ARM Process| arm_process_service_ctrl_info_channel_events: Configured controller address ipv6 :: ipv4 10.17.24.43 service 0.0.0.0

Oct 15 23:23:38 ARM Process[6250]: <703004> <7730> <WARN> |ARM Process| set_amon_switch_ip: changing amon switch ip addr to 10.17.24.43

Oct 15 23:23:38 ARM Process[6250]: <703004> <7730> <WARN> |ARM Process| arm_process_service_ctrl_info_channel_events: Configured controller address ipv6 :: ipv4 10.17.24.43 service 0.0.0.0

Oct 15 23:23:38 ARM Process[6250]: <703004> <7730> <WARN> |ARM Process| set_amon_switch_ip: changing amon switch ip addr to 10.17.24.43

Oct 15 23:23:38 ARM Process[6250]: <703004> <7730> <WARN> |ARM Process| arm_process_service_ctrl_info_channel_events: Configured controller address ipv6 :: ipv4 10.17.24.43 service 0.0.0.0

Oct 15 23:23:38 ARM Process[6250]: <703004> <7730> <WARN> |ARM Process| set_amon_switch_ip: changing amon switch ip addr to 10.17.24.43

Command History

Release

Modification

AOS 8.0.0.0

Command Introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Conductor.