show log peer-debug{[<number>][all]}
Description
Show the peer-debug logs.
|
Parameter |
Description |
|
<number> |
Start displaying the log output from the specified number of lines from the end of the log. |
|
all |
Shows all the AP debug logs for the controller. |
Example
This example shows the ten most recent AP debug logs for the controller.
(host)[node] #show peer-debug log 10
Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): wifi0: Base BSSID 00:1a:1e:25:97:d0, 16 available BSSID(s)
Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): edev->dev_addr=00:1a:1e:ca:59:7c
Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): wifi1: Base BSSID 00:1a:1e:25:97:c0, 16 available BSSID(s)
Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): edev->dev_addr=00:1a:1e:ca:59:7c
Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): ^H<6>Ethernet Channel Bonding Driver: v3.0.1 (January 9, 2006)
Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): secure_jack_link_state_change: Error finding device eth0
Nov 24 20:54:25 KERNEL(AP39@10.6.1.21): Kernel watchdog refresh ended.
Related Commands
|
Command |
Description |
|
Use this command to specify the IP address of the remote logging server, facility, severity, and the type. |
|
|
The slog_flash application continuously updates log files to the USB storage. An error occurs when the USB storage is removed when the update is in progress. This command is introduced to prompt the user before removing the external USB, to avoid this error. |
Command History
|
Release |
Modification |
|
AOS 8.7.0.0 |
Command Introduced. |
Command Information
|
Platforms |
License |
Command Mode |
|
All platforms |
Base operating system. |
Enable or Config mode on Mobility Conductor. |
