show log security{[<number>][all]}
Description
Show the controller’s security logs.
|
Parameter |
Description |
|
<number> |
Start displaying the log output from the specified number of lines from the end of the log. |
|
all |
Shows all the security logs for the controller. |
Example
This example shows the controller’s last seven security logs.
(host)[node] #show log security 7
Mar 5 11:53:43 :124004: <DBUG> |authmgr| Local DB auth failed for user admin, error (User not found in UserDB)
Mar 5 11:53:43 :124003: <INFO> |authmgr| Authentication result=Authentication failed(1), method=Management, server=Internal, user=10.100.100.66
Mar 5 11:53:43 :124004: <DBUG> |authmgr| Auth server 'Internal' response=1
Mar 5 11:53:43 :125027: <DBUG> |aaa| mgmt-auth: admin, failure, , 0
Mar 5 11:53:43 :125024: <NOTI> |aaa| Authentication Succeeded for User admin, Logged in from 10.100.100.66 port 1778, Connecting to 10.3.49.100 port 22 connection type SSH
Mar 5 11:53:58 :103060: <DBUG> |ike| ipc.c:ipc_get_cfgm_role:2826 Sending REQUEST for CFGM Role
Mar 5 11:53:58 :103060: <DBUG> |ike| ipc.c:get_local_cfg_trigger_ike:2653 IKE got trigger from CFGM : state :3
Command History
|
Release |
Modification |
|
AOS 8.0.0.0 |
Command Introduced. |
Command Information
|
Platforms |
License |
Command Mode |
|
All platforms |
Base operating system. |
Enable or Config mode on Mobility Conductor or managed devices. |
