show vlan status <id>
Description
This command shows the current status of all VLANs on the controller. Use this command to show the status of VLANs on the controller. The column displays the VLAN ID name or number. The column provides the VLAN’s IP address. The Adminstate column indicates if the VLAN is enabled or disabled. The Operstate column indicates if the VLAN is currently up and running. The PortCount column shows how many ports are associated with the VLAN. The Nat Inside column displays whether source Nat is enabled for the VLAN interface. If Nat is enabled, all the traffic passing through this VLAN interface is the source natted to the outgoing interface’s IP address.
Example
(host) #show vlan status
Vlan Status
-----------
VlanId IPAddress Adminstate Operstate PortCount Nat Inside Mode Ports AAA Profile
------ --------- ---------- --------- --------- ---------- ---- ----- -----------
1 unassigned/unassigned Enabled Up 9 Disabled Regular GE1/0 GE1/2 GE1/5-9 XG1/10-11 Pc0 Pc2-5 Pc7 N/A
2 N/A N/A N/A 3 Disabled Regular GE1/7-9 N/A
10 172.20.10.202/255.255.255.0 Enabled Up 4 Disabled Regular GE1/7-9 Pc6 N/A
21 172.20.21.202/255.255.255.0 Disabled Down 4 Disabled Regular GE1/7-9 N/A
24 172.20.24.202/255.255.255.0 Disabled Down 3 Disabled Regular GE1/7-9 N/A
29 172.20.29.202/255.255.255.0 Enabled Up 4 Disabled Regular GE1/7-9 Pc6 N/A
101 172.102.1.202/255.255.255.0 Enabled Down 3 Disabled Regular GE1/7-9 N/A
102 172.102.2.202/255.255.255.0 Enabled Down 3 Disabled Regular GE1/7-9 N/A
Related Commands
|
Command |
Description |
|
This command creates a VLAN ID or a range of VLAN IDs on the managed device. |
|
|
This command creates a named VLAN on the managed device and given an assignment type. |
Command History
|
Release |
Modification |
|
AOS 8.0.0.0 |
Command introduced. |
Command Information
|
Platform |
License |
Command Mode |
|
All platforms |
Base operating system. |
Config mode on Mobility Conductor. |
