zigbee socket-outbound-profile
zigbee socket-outbound-profile <profile-name>
asp-ack
clone
cluster
endpoint
no
profile
source-endpoint
Description
This command configures or modifies a ZigBee socket outbound profile.
Parameter |
Description |
asp-ack |
Enables acknowledge of AP. |
clone <source> |
Copy ZigBee socket outbound profile data from another ZigBee socket outbound profile. |
cluster <cluster> |
The cluster identity. 0x0000 to 0x7FFF and 0xFC00 to 0xFFFF |
endpoint <endpoint> |
The destination endpoint. 1 to 254 |
no |
This ID identifies the sender to the server. |
profile <profile> |
The profile identity. 0x0000 to 0x7FFF and 0xC000 to 0xFFF |
source-endpoint <source-endpoint> |
The source endpoint. 1 to 254 |
Example
The following example configures a ZigBee socket outbound profile:
(host) [mynode] (config) #zigbee socket-outbound-profile sample_zb_socket_outbound_profile
(host) [mynode] (Zigbee Socket Outbound Profile "sample") #aps-ack
(host) [mynode] (Zigbee Socket Outbound Profile "sample_zb_socket_outbound_profile") #cluster 0x1234
(host) [mynode] (Zigbee Socket Outbound Profile "sample_zb_socket_outbound_profile") #endpoint 12
(host) [mynode] (Zigbee Socket Outbound Profile "sample_zb_socket_outbound_profile") #profile 34
(host) [mynode] (Zigbee Socket Outbound Profile "sample_zb_socket_outbound_profile") #source-endpoint 56
Related Commands
Command |
Description |
Shows the ZigBee socket outbound profile. |
Command History
Release |
Modification |
AOS 8.7.0.0 |
Command introduced. |
Command Information
Platforms |
License |
Command Mode |
All platforms |
Base operating system. |
Configuration IoT Data Profile Mode (config-submode). |