4 System Configuration
8 Datacenter Redundancy
1 Show Datacenter Redundancy Status
Description
Enter command option 1 from the Datacenter Redundancy commands to display the datacenter redundancy status of the primary cluster.
System Configuration Options
1. Upgrade 2. Network Setup 3. Proxy Setup 4. Setup Timezone 5. Setup NTP 6. Node Setup
7. Air Gap 8. Datacenter Redundancy 9. Upgrade ILO using Service Pack 10. Autorecovery Maintenance window ==================================== b. back m. main menu 0. exit Enter option [ 0 - 10 ]: 8
From the System Configuration options, select 8 to display the Datacenter Redundancy options.
Datacenter Redundancy Options
1. Show Datacenter Redundancy Status 2. Configure Datacenter Redundancy 3. Automatic Failover 4. Restore Frequency 5. Time to Failover 6. Initiate Switchover 7. Remove Datacenter Redundancy Configuration ==================================== b. back m. main menu 0. exit Enter option [ 0 - 7 ]: 1
From the Datacenter Redundancy options, select 1 to display the Datacenter Redundancy status.
Enter option [ 0 - 7 ]: 1 ---------------------------------- Datacenter Redundancy configuration ---------------------------------- Peer Cluster FQDN : central-cop-xxxx-xx-xxx-xxxx.xxxx.arubaxxx.com Initial Role : Secondary Time to Failover (Minutes) : 15 Automatic Failover : True Restore Frequency(Days) : 3 -------------------- State Data -------------------- Cluster Role : Secondary Primary Since : 0 -------------------- Health Info -------------------- Datacenter Redundancy Health Status : Good Failover In-Progress : False Heartbeat Status : Successful Failover Status : Successful HB Failure Count : 0 Last heartbeat from Peer : Jun 19, 2023, 10:31 Last Failover Time : Jun 12, 2023, 05:58 Restore Status : Successful Last Restore Time : Jun 17, 2023, 11:06 -------------------- Peer Health Info -------------------- Peer Datacenter Redundancy Health Status : Error (Pairing Key mismatch) Peer Heartbeat Status : Pairing Key mismatch Peer Failover Status : Successful Press [Enter] key to continue...
Related Commands
| Command |
Description |
|---|---|
|
Configures the secondary cluster in the network. |
|
|
Enables and disables automatic failover in the network. |
|
|
Enables to set the restore frequency. |
|
|
Enables to set the time for manual failover. |
|
|
Initiates HPE Aruba Networking Central On-Premises cluster switchover. |
|
|
Removes datacenter redundancy configuration from the HPE Aruba Networking Central On-Premises network. |
Command History
| Release | Modification |
|
HPE Aruba Networking Central On-Premises 2.5.7 |
Command introduced. |
