4 System Configuration
8 Datacenter Redundancy
2 Configure Datacenter Redundancy Status
2 Show Datacenter Redundancy Pairing Key
Description
Enter option 2 from the Configure Datacenter Redundancy commands to display the datacenter redundancy pairing key.
System Configuration Options
1. Upgrade 2. Network Setup 3. Proxy Setup 4. Setup Timezone 5. Setup NTP 6. Node Setup
7. Air Gap 8. Datacenter Redundancy 9. Upgrade ILO using Service Pack 10. Autorecovery Maintenance window ==================================== b. back m. main menu 0. exit Enter option [ 0 - 10 ]: 8
From the System Configuration options, select 8 to display the Datacenter Redundancy options.
Datacenter Redundancy Options
1. Show Datacenter Redundancy Status 2. Configure Datacenter Redundancy 3. Automatic Failover 4. Restore Frequency 5. Time to Failover 6. Initiate Switchover 7. Remove Datacenter Redundancy Configuration ==================================== b. back m. main menu 0. exit Enter option [ 0 - 7 ]: 2
From the Datacenter Redundancy options, select 2 to configure the Datacenter Redundancy status.
Configure Datacenter Redundancy Options
1.Show Config 2.Show Datacenter Redundancy Pairing Key 3.Configure 4.Enable Redundancy 5.Diasble Redundancy ===================================== b. back m. main menu 0. exit Enter option [0 - 5]: 2
From the Configure Datacenter Redundancy options, select 2 to show Datacenter Redundancy Pairing Key.
eyJbHvyX2FtnjuiTh2YfhvdezxiKloiNhytfVbnhgt34Jirfcvdsa aHR0HNc1JoiungfcVyhgfr56FTkijolpuU89nhupjjFrtgvczswRT alpXmxWRThkIn0= Press [Enter] key to continue...
Related Commands
| Command |
Description |
|---|---|
|
Displays the configuration specification of the secondary cluster. |
|
|
Configures the secondary cluster for data center redundancy. |
|
|
Enables data center redundancy. |
|
|
Disables data center redundancy. |
Command History
| Release | Modification |
|
HPE Aruba Networking Central On-Premises 2.5.7 |
Command introduced. |
