4 System Configuration
8 Datacenter Redundancy
2 Configure Datacenter Redundancy Status
3 Configure
Description
Enter option 3 from the Configure Datacenter Redundancy commands to configure the secondary cluster for datacenter redundancy.
System Configuration Options
1. Upgrade 2. Network Setup 3. Proxy Setup 4. Setup Timezone 5. Setup NTP 6. Node Setup
7. Air Gap 8. Datacenter Redundancy 9. Upgrade ILO using Service Pack 10. Autorecovery Maintenance window ==================================== b. back m. main menu 0. exit Enter option [ 0 - 10 ]: 8
From the System Configuration options, select 8 to display the Datacenter Redundancy options.
Datacenter Redundancy Options
1. Show Datacenter Redundancy Status 2. Configure Datacenter Redundancy 3. Automatic Failover 4. Restore Frequency 5. Time to Failover 6. Initiate Switchover 7. Remove Datacenter Redundancy Configuration ==================================== b. back m. main menu 0. exit Enter option [ 0 - 7 ]: 2
From the Datacenter Redundancy options, select 2 to configure the Datacenter Redundancy status.
Configure Datacenter Redundancy Options
1.Show Config 2.Show Datacenter Redundancy Pairing Key 3.Configure 4.Enable Redundancy 5.Diasble Redundancy ===================================== b. back m. main menu 0. exit Enter option [0 - 5]: 3
From the ConfigureDatacenter Redundancy options, select 3 to configure.
Datacenter Redundancy is already configured. Do you want to continue(Y/N)?
Related Commands
| Command |
Description |
|---|---|
|
Displays the configuration specification of the secondary cluster. |
|
|
Displays the datacenter redundancy pairing key. |
|
|
Enables data center redundancy. |
|
|
Disables data center redundancy. |
Command History
| Release | Modification |
|
HPE Aruba Networking Central On-Premises 2.5.7 |
Command introduced. |
