4 System Configuration
8 Datacenter Redundancy
4 Restore Frequency
Description
Enter command option 4 from the Datacenter Redundancy commands to set the restore frequency.
System Configuration Options
1. Upgrade 2. Network Setup 3. Proxy Setup 4. Setup Timezone 5. Setup NTP 6. Node Setup
7. Air Gap 8. Datacenter Redundancy 9. Upgrade ILO using Service Pack 10. Autorecovery Maintenance window ==================================== b. back m. main menu 0. exit Enter option [ 0 - 10 ]: 8
From the System Configuration options, select 8 to display the Datacenter Redundancy options.
Datacenter Redundancy Options
1. Show Datacenter Redundancy Status 2. Configure Datacenter Redundancy 3. Automatic Failover 4. Restore Frequency 5. Time to Failover 6. Initiate Switchover 7. Remove Datacenter Redundancy Configuration ==================================== b. back m. main menu 0. exit Enter option [ 0 - 7 ]: 4
From the Datacenter Redundancy options, select 4 to restore frequency.
Enter Restore Frequency(Days) (Range : 3 - 7) : 4 Restore Frequency is set to 4 Press [Enter] key to continue...
| Command |
Description |
|---|---|
|
Displays the Datacenter Redundancy status of the primary cluster. |
|
|
Configures the secondary cluster in the network. |
|
|
Enables and disables automatic failover in the network. |
|
|
Enables to set the time for manual failover. |
|
|
Initiates HPE Aruba Networking Central On-Premises cluster switchover. |
|
|
Removes Datacenter Redundancy configuration from the HPE Aruba Networking Central On-Premises network. |
Command History
| Release | Modification |
|
HPE Aruba Networking Central On-Premises 2.5.7 |
Command introduced. |
