4 System Configuration
8 Datacenter Redundancy
6 Initiate Switchover
Description
Enter command option 6 from the Datacenter Redundancy commands to initiate HPE Aruba Networking Central On-Premises cluster switchover.
System Configuration Options
1. Upgrade 2. Network Setup 3. Proxy Setup 4. Setup Timezone 5. Setup NTP 6. Node Setup
7. Air Gap 8. Datacenter Redundancy 9. Upgrade ILO using Service Pack 10. Autorecovery Maintenance window ==================================== b. back m. main menu 0. exit Enter option [ 0 - 10 ]: 8
From the System Configuration options, select 8 to display the Datacenter Redundancy options.
Datacenter Redundancy Options
1. Show Datacenter Redundancy Status 2. Configure Datacenter Redundancy 3. Automatic Failover 4. Restore Frequency 5. Time to Failover 6. Initiate Switchover 7. Remove Datacenter Redundancy Configuration ==================================== b. back m. main menu 0. exit Enter option [ 0 - 7 ]: 6
From the Datacenter Redundancy options, select 6 to initiate switchover.
Enter option [0 - 7]: 6 Current role is Secondary. Warning: Failover will be initiated. Devices may disconnect and come up on the new primary. Do you want to continue (Y/N)?
Related Commands
| Command |
Description |
|---|---|
|
Displays the Datacenter Redundancy status of the primary cluster. |
|
|
Configures the secondary cluster in the network. |
|
|
Enables and disables automatic failover in the network. |
|
|
Enables to set the restore frequency. |
|
|
Enables to set the time for manual failover. |
|
|
Removes Datacenter Redundancy configuration from the HPE Aruba Networking Central On-Premises network. |
Command History
| Release | Modification |
|
HPE Aruba Networking Central On-Premises 2.5.7 |
Command introduced. |
