upgrade-image

upgrade-image

upgrade-image2

upgrade-image2-no-reboot

upgrade-image2-no-switch-partition-reboot

{<url> [ /ftp | /tftp | /http]}

Description

These commands allow you to upgrade an Instant AP to use a new image file from the FTP or TFTP server, or by using an HTTP URL. Before uploading an image file, ensure that you have the appropriate image file for your Instant AP. The following examples describe the image class for different Instant AP models:

For RAP-155/155P—ArubaInstant_Aries_<build-version>

For IAP-224/225, IAP-228, IAP-274/275, and IAP-277—ArubaInstant_Centaurus_<build-version>

For AP-324/325—ArubaInstant Hercules_doc release_xxxx

For all other Instant APs—ArubaInstant_Orion_<build-version>

Parameter	Description
upgrade-image	Upgrades the Instant AP to use a new image.
upgrade-image2	Uploads an additional image file and upgrades the Instant AP to use this image file when required. You can also use this command to upgrade images for multi-class Instant AP cluster.
upgrade-image2-no-reboot	Uploads an image file and upgrades the Instant AP to use the new image without rebooting the Instant APs.
upgrade-image2-no-switch-partition-reboot	Uploads an additional image file into the backup partition.
<url>	Allows you to specify the FTP, TFTP, or HTTP URL.

Example

The following examples upgrade an Instant AP by using an image file from the FTP server:

To upgrade images for a multi-class Instant AP cluster:

Command History

Release	Modification
HPE Aruba Networking Instant 8.3.0.0	Command introduced.

Command Information

Platform	Command Mode
All platforms	Privileged EXEC mode.