Filter ID Based Enforcement Profile

Use this page to configure profile and attribute parameters for the Filter ID based enforcement profile. The Filter ID Based Enforcement profile contains the following tabs:

Profile Configuration

The following figure displays the Filter ID Based Enforcement > Profile dialog:

Figure 1  Filter ID Based Enforcement Profile Dialog

Specify the Filter ID Based Enforcement Profile parameters as described in the following table:

Table 1: Filter ID Based Enforcement > Profile Parameters

Parameter

Action/Description

Template

Select the Filter ID Based Enforcement template.

Name

Enter the name of the profile. The name is displayed in the Name column on the Configuration > Enforcement > Profiles page.

Description

Enter a description of the profile. The Description is displayed in the Description column on the Configuration > Enforcement > Profiles page.

Type

RADIUS. The field is populated automatically.

Action

Enabled. Click Accept, Reject, or Drop to define the action taken on the request.

Device Group List

Select a Device Group from the drop-down list. The list displays all configured Device Groups.

All configured device groups are listed in the Device Groups page: Configuration > Network > Device Groups. After you add one or more device group(s), you can select a group and take one of the following actions:

To delete the selected Device Group List entry, click Remove.

To see the device group parameters, click View Details.

To change the parameters of the selected device group, click Modify.

NOTE: To add a new a device group, click the Add New Device Group link and see Adding and Modifying Device Groups.

Attributes Configuration

The following figure displays the Filter ID Based Enforcement Profile > Attributes dialog:

Figure 2  Filter ID Based Enforcement Profile > Attributes Dialog

Specify the Filter ID Based Enforcement > Attributes parameters as described in the following table:

Table 2: Filter ID Based Enforcement Profile > Attributes Tab Parameters

Parameter

Description
Type

By default, the Filter ID Based Enforcement Profile is prepopulated with the RADIUS: ITEF attribute type. To select another attribute type, click the Type drop-down menu and select another of the following RADIUS Remote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  options:

Radius:Aruba

Radius:Cisco

Radius: Hewlett-Packared-Enterprise

Radius: Lucent-Alcatel-Enterprise

Radius:Microsoft

Radius:Avenda

For more information, see RADIUS Namespaces.
Name

By default, the Filter ID Based Enforcement Profile is prepopulated with the Filter-ID RADIUS Remote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  attribute type. To seelct another RADIUS Remote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  attribute, click the name dropdown menu and select from the list of available attributes. The options displayed for the Name attribute depend on the attribute that was selected.
Value

Specify the appropriate value for the RADIUS Remote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  attrbute in the Value.

Depending upon the RADIUS Remote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  attribute selected in the Name field, you must either manually enter a value in the Value field, or click the Value dropdown menu and one of the available options.