You are here: CLI_commands > device-id
Previous TopicNext Topic

device-id

device-id <device>

Description

This command assigns an ID for the AP device.

Syntax

Parameter

Description

device-id <device> Configures an ID for the IAP device.

Usage Guidelines

Use this command to configure a device identification.

Example

The following example configures a device ID:

(Instant AP)(config)# device-ID Device1

(Instant AP)(config)# end

(Instant AP)# commit apply

Command History

Version

Description

Aruba Instant 6.2.1.0-3.3

This command is introduced.

Command Information

IAP Platform

Command Mode

All platforms

Configuration mode