You are here: CLI_commands > show ip dhcp database
Previous TopicNext Topic

show ip dhcp database

show ip dhcp database

Description

This command displays the DHCP server settings.

Usage Guidelines

Use this command to the DHCP server settings. The DHCP server is a built-in server, used for networks in which clients are assigned IP address by the Virtual Controller.

Example

The following output is displayed for the show ip dhcp database command:

DHCP Subnet :192.0.2.0

DHCP Netmask :255.255.255.0

DHCP Domain Name :example.com

DHCP DNS Server :192.0.2.1

DHCP DNS Cache :Disabled

The output of this command provides the following information:

Column

Description

DHCP subnet

Indicates the network range for the client IP addresses.

DHCP Netmask

Indicates the subnet mask specified for the IP address range for the DHCP subnet.

DHCP Lease Time(m)

Indicates the duration of DHCP lease. The lease time refers to the duration of lease that a DHCP-enabled client has obtained for an IP address from a DHCP server.

DHCP Domain Name

Indicates the domain-name of the DHCP client.
DHCP DNS Server Indicates the IP address of the DNS server.
DHCP DNS Cache Indicates if the DNS cache is enabled.

Command History

Version

Description

Aruba Instant 6.4.0.2-4.1 The output of this command was modified.

Aruba Instant 6.2.1.0-3.3

This command is introduced.

Command Information

IAP Platform

Command Mode

All platforms

Privileged EXEC mode