Models, specifications, and compatibility

SFP⁠+ optical transceiver modules provide a transmission rate of 10.31 Gbps and use LC connectors. 10G BiDi transceivers always require paired sets: a -U must pair to a -D on the opposite end of the BiDi link, using a single fiber strand and a simplex LC connector.

The specifications for Revision D and E transceiver products are the same as the specified Revision A, B, C SKUs. Where support for a Revision A, B, or C transceiver existed, Revision D or E parts are also supported. Not all earlier revisions can be re-used on newer products: Check the tables below and compare the 4x4 number of the part to the list of supported 4x4 numbers. See Identification of 4x4 part numbers for more information.

Specifications for SFP⁠+ optical transceiver modules

*End of Sale (EOS) series listed for compatibility info only
Product Name (SKU)	DOM - digital optical monitoring (4x4 part #)	Nominal wl (nm) & encoding type	Fiber mode	Fiber diameter (µm)	Bandwidth (MHz*km)	Transmission distance
HPE X132 10G SFP⁠+ LC SR xcvr (J9150A)*EOS Aruba 10G SFP⁠+ LC SR 300m MMF xcvr (J9150D) HPE ANW 10G SR SFP+ LC 400m OM4 C-class xcvr (S2P30A) Aruba 10G I-Tmp SFP+ LC SR 300m MMF xcvr (JL782A) Aruba 10G SFP⁠+ LC SR 300m MMF TAA xcvr (JL748A)	Yes J9150A/J9150D: (1990-4391, 1990-4635, 1990-4634, 1990-4175) S2P30A: (1990-4918, 1990-4916) JL782A: (1990-4767, 1990-4770) JL748A: (1990-4175, 1990-4776)	Single lane, 850 1x10G NRZ	MMF (duplex LC)	50/125	4700 (OM4) 2000 (OM3) 500 (OM2) 400	400 m (1312.34 ft) 300 m (984.25 ft) 82 m (269.03 ft) 66 m (216.54 ft)
		Single lane, 850 1x10G NRZ	MMF (duplex LC)	62.5/125	200 (OM1) 160	33 m (108.27 ft) 26 m (85.30 ft)
HPE X132 10G SFP⁠+ LC LRM xcvr (J9152A)*EOS Aruba 10G SFP⁠+ LC LRM 220m MMF xcvr (J9152D)	Yes (1990-4485 1990-4801) See note below regarding MCP.	Single lane, 1310 1x10G NRZ	MMF (duplex LC)	50/125	1500 500 (OM2) 400	220m (721.78 ft) 220m (721.78 ft) 100m (328.08 ft)
			MMF (duplex LC)	62.5/125	200 (OM1) 160	220m (721.78 ft) 220m (721.78 ft)
			SMF (duplex LC)	9/125	N/A	300m (987.25 ft)
HPE X132 10G SFP⁠+ LC LR xcvr (J9151A)EOS Aruba 10G SFP⁠+ LC LR 10km SMF xcvr (J9151DEOS and J9151E) HPE ANW 10G LR SFP+ LC 10km SMF C-xcvr (S2P31A) Aruba 10G SFP⁠+ LC LR 10km SMF TAA xcvr (JL749A) Aruba 10G I-Tmp SFP+ LC LR 10km SMF xcvr (JL783A)	Yes J9151A/J9151D: 1990-4657 1990-4694 1990-4727 J9151E: (1990-4694, 1990-4727) S2P31A: (1990-4919) JL749A: (1990-4751, 1990-4752) JL783A: (1990- 4768,1990-4769)	Single lane, 1310 1x10G NRZ	SMF (duplex LC)	9/125	N/A	10km (6.21 miles)
Aruba 10G LC BiDi 40km-D 1314/1289 xcvr (R9X54A)	Yes (1990-4843)	TX:1314 RX:1289 1x10G NRZ	SMF (simplex LC)	9/125	N/A	40km (24.86 miles)
Aruba 10G LC BiDi 40km-U 1289/1314 xcvr (R9X55A)	Yes (1990-4842)	TX:1289 RX:1314 1x10G NRZ	SMF (simplex LC)	9/125	N/A	40km (24.86 miles)
HPE X132 10G SFP⁠+ LC ER xcvr (J9153A)*EOS Aruba 10G SFP⁠+ LC ER 40km SMF xcvr (J9153D) HPE ANW 10G ER SFP+ LC 40km SMF C-xcvr (S2P32A)	Yes (1990-4365, 1990-4656)	Single lane, 1550 1x10G NRZ	SMF (duplex LC)	9/125	N/A	40km (24.86 miles) on engineered link (less than 11.1dBm loss over the entire link). 30km on standard SMF links.

MCP note: J9152D 10G LRM (long leach multimode) with 4x4 numbers 1990-4485 or 1990-4801 are tuned so that they do not require a Mode Conditioning Patch (MCP) cable. Older J9152A with 4x4 numbers other than 1990-4485 or 1990-4801 may require an MCP when you use OM1 or OM2 fiber cables. Never use mode conditioning patch cables for OM3 or OM4 fiber types. For more information about mode conditioning patch cables, see related sections in the IEEE 802.3 standard.

10G LRM transceivers require an Electronic Dispersion Compensation (EDC) behind the SFP⁠+ port to support 10G LRM technology. Switches with note "(or any type of 10G LRM technology)" cannot support any type of 10G LRM transceiver (even under Unsupported Transceiver mode).

Aruba high-temperature industrial transceivers (I-Tmp) will work in Aruba switches other than the 4100i, but they may be listed as unsupported in show interface brief outputs.

**Optical specifications for SFP⁠+ optical transceiver modules**

*End of Sale (EOS) series listed for compatibility info only
Product name (SKU)	Connector	Optical parameters (dBm)
Product name (SKU)	Connector	Transmit power	Receive power	Temperature Ratings	Required power
HPE X132 10G SFP⁠+ LC SR Transceiver (J9150A)*EOS Aruba 10G SFP⁠+ LC SR 300m MMF xcvr (J9150D) HPE ANW 10G SR SFP+ LC 400m OM4 C-xcvr (S2P30A) Aruba 10G SFP+ LC SR 300m MMF TAA xcvr (JL748A) Aruba 10G I-Tmp SFP+ LC SR 300m MMF xcvr (JL782A)	Duplex LC (PC or UPC)	–7.3 to –1	–9.9 to +0.5	Industrial (-40 to +85°	1 W
HPE X132 10G SFP⁠+ LC LRM xcvr (J9152A)*EOS Aruba 10G SFP⁠+ LC LRM 220m MMF xcvr (J9152D)	Duplex LC (PC or UPC)	–6.5 to +0.5	–6.5 to +1.5	Commercial (0 to 70°C)	1 W
HPE X132 10G SFP⁠+ LC LR xcvr (J9151A)EOS Aruba 10G SFP⁠+ LC LR 10km SMF xcvr (J9151DEOS/J9151E) HPE ANW 10G LR SFP+ LC 10km SMF C-xcvr(S2P31A) Aruba 10G SFP+ LC LR 10km SMF TAA xcvr (JL749A) Aruba 10G I-Tmp SFP+ LC LR 10km SMF xcvr (JL783A)	Duplex LC (PC or UPC)	–8.2 to +0.5	–14.4 to +0.5	Commercial (0 to 70°C)	1 W
Aruba 10G LC BiDi 40km-D 1330/1270 xcvr (R9X54A) Aruba 10G LC BiDi 40km-U 1270/1330 xcvr (R9X55A)	Simplex LC (PC or UPC)	0 to +5	-19 to -7 (use a 12dB attenuator for short SMF cables)	Industrial (-40 to +85°	1.5 W
HPE X132 10G SFP⁠+ LC ER xcvr (J9153A)*EOS Aruba 10G SFP⁠+ LC ER 40km SMF xcvr (J9153D) HPE ANW 10G ER SFP+ LC 40km SMF C-xcvr (S2P32A)	Duplex LC (PC or UPC)	–4.7 to +4	–15.8 to –1 (use a 5dB attenuator for short SMF cables)	Commercial (0 to 70°C)	1.5 W

**Compatibility for the SFP⁠+ optical transceiver module**

*End of Sale (EOS) series listed for compatibility info only
SFP+ (10G) capable product name	Switch/Module SKU #'s	Minimum software required	Comments
2530 Switch Series*(EOS)	J9853A, J9854A, J9855A, J9856A	J9150A/J9150D, J9151A/J9151D/J9151E, and J9153A/J9153D only: All releases	Unlisted models do not have SFP⁠+ ports
2540 Switch Series*(EOS)	JL354A, JL355A, JL356A, JL357A	J9150A/J9150D and J9151A/J9151D, J9153A/J9153D only: All releases J9152A/J9152D (LRM) is not supported in any 2540 model	J9152A/J9152D (or any type of 10G LRM technology) is not supported in any 2540 model even under UT-mode
2910al Switch Series*(EOS)	J9008A	J9150A/J9150D and J9151A/J9151D only: All releases J9153A/J9153D: W.15.07.0002	Unlisted models do not have SFP⁠+ ports
2920 Switch Series*(EOS)	J9726A, J9727A, J9728A, J9729A, J9836A	J9150A/J9150D and J9151A/J9151D,J9153A/J9153D only: All releases	For use in an installed J9731A Aruba 2920 2-port 10GbE SFP⁠+ Module
2930F Switch Series	JL253A, JL254A, JL255A, JL256A, JL258A, JL263A, JL264A, JL558A, JL559A	J9150A/J9150D and J9151A/J9151D/J9151E, J9153A/J9153D: All versions JL748A/JL749A (TAA xcvrs): 16.08.0021 and 16.10.0007 S2P30A, S2P31A, S2P32A(C-Class): 16.11.0018 J9152A/J9152D (or any type of 10G LRM technology) is not supported in any 2930F model	Unlisted models do not have SFP⁠+ ports. J9152A/J9152D (or any type of 10G LRM technology) is not supported in any 2930F model.
2930M Switch Series	JL319A, JL320A, JL321A, JL322A, JL323A, JL324A	J9150A/J9150D and J9151A/J9151D/J9151E, J9153A/J9153D: All versions JL748A/JL749A (TAA xcvrs): 16.08.0021 and 16.10.0007 S2P30A, S2P31A, S2P32A(C-Class): 16.11.0018	For use in an installed JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module
2930M Switch Series	R0M67A, R0M68A	J9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D, J9153A/J9153D: WC.16.05.xxxx JL748A/JL749A (TAA xcvrs): 16.08.0021 and 16.10.0007 S2P30A, S2P31A, S2P32A(C-Class): 16.11.0018
3500yl Switch Series*(EOS)	J8692A, J8693A, J9310A, J9311A	J9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D: K.14.50 J9153A/J9153D: K.15.02.0004	For use in an installed J9312A 10GbE 2-port SFP⁠+/2-port CX4 yl Module.
3800 Switch Series*(EOS)	J9575A, J9576A, J9573A, J9574A, J9584A	J9150A/J9150D and J9151A/J9151D/J9151E, J9153A/J9153D: All versions	Unlisted models do not have SFP⁠+ ports.
3810M Switch Series* (EOS)	JL071A, JL072A, JL073A, JL074A, JL075A, JL076A	J9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D, J9153A/J9153D: All versions JL748A/JL749A (TAA xcvrs): 16.08.0021 and 16.10.0007 S2P30A, S2P31A, S2P32A(C-Class): 16.11.0018	For use in an installed JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module
4100i Switch Series	JL817A, JL818A	Commercial Temp xcvrs J9150D (SR), J9151D (LR) (): 10.08 J9153D (ER): 10.08.0001 No Aruba 10G ER industrial temp xcvr available S2P30A, S2P31A, S2P32A(C-Class): 10.13.1000 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series (even under UT-mode)	Temp warnings will trigger at lower temperatures (~50C) if Commercial Temp vs Industrial Temp transceivers (~70C) are used. Commercial temp transceivers listed are enabled by 10.08.0001 but will be marked as "unsupported" because of non-compliant temp rating. All Third Party transceivers are treated as Commercial Temp, regardless of capability.
4100i Switch Series	JL817A, JL818A	Industrial Temp xcvrs JL782A (SR), JL783A (LR): 10.08.0001
5400zl Switch Series*(EOS)	J9309A	J9150A/J9150D and J9151A/J9151D/J9151E: K.14.39 J9153A/J9153D: K.15.02.0004	The J9309A 4-port SFP⁠+ module supports only 10G transceivers. 10G ER (J9153A/D) transceivers are limited to a maximum of two transceivers per J9309A or J9538A modules when used in a 5400zl or 8200zl chassis.
5400zl Switch Series*(EOS)	J9538A, J9548A, J9536A	J9150A/J9150D and J9151A/J9151D/J9151E, J9153A/J9153D: K.15.02.0004
5400R Switch Series	J9538A, J9548A, J9536A	J9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D, J9153A/J9153D: All versions JL748A/JL749A (TAA xcvrs): 16.08.0021 and 16.10.0007 S2P30A, S2P31A, S2P32A(C-Class): 16.11.0018 R9X54A/R9X55A (40km BiDi): Not supported
5400R Switch Series	J9990A, J9993A	J9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D, J9153A/J9153D: KB.15.17 JL748A/JL749A (TAA xcvrs):16.08.0021 and 16.10.0007 S2P30A, S2P31A, S2P32A(C-Class): 16.11.0018 R9X54A/R9X55A (40km BiDi): Not supported
5420 Switch Series	S0U63A S0U73A (TAA) S0U64A S0U74 (TAA) S0U68A S0U78A (TAA)	J9150D, J9151E, J9152D(LRM), S2P30A, S2P31A, S2P32A (C-Class), R9X54A/R9X55A (40km BiDi), JL748A (TAA), JL749A (TAA), J9153A/J9153D: 10.15.0001	Older revisions may exhibit issues. Replace with latest 10G xcvrs. When 10G ER (J9153A/J9153D) is installed with in 10G BASE-T (JL536A/JL563B) in S0U63A/S0U73A, cannot support excursion up to 131°F (55°C) for any period of time.
6100 Switch Series	All models	J9150D, J9151E: 10.06.0001 JL748A/JL749A (TAA transceivers): 10.06.0130 /10.07.0010 S2P30A, S2P31A (C-Class): 10.13.1000 J9153D (ER) is not supported on the 6100 series	Only the listed 4x4 parts are fully supported J9150A/J9150D 1990-4391 1990-4175 1990-4635 1990-4634 J9151A/J9151D 1990-4657 1990-4727 1990-4694 J9151E 1990-4727 1990-4694 J9152A/J9152D (or any type of 10G LRM technology) is not supported on the 6100 Series
6120 Blade Switch Series*(EOS)	516733-B21 (6120XG)	J9150D, J9151E: 10.06.0001 J9152D (LRM) and J9153D (ER) are not supported on the 6120 series	498358-B21 (6120G/XG) has 1GB SFP and 10G XFP or CX4 ports and does not support these SFP⁠+ transceivers.
6200yl Switch Series*(EOS)	J8992A	J9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D: K.14.50 J9153A/J9153D: K.15.02.0004	J8992A fixed SFP ports are 1GB and do not support these SFP⁠+ transceivers. For use in an installed J9312A 10GbE 2-port SFP⁠+/2-port CX4 yl Module.
6200F Switch Series	6200F models JL724A through JL728A except 12p models R8Q72A/R8V13A (TAA)	J9150A/J9150D, J9151A/J9151D, J9151E, J9153A/J9153D: 10.04.1000 JL748A/JL749A (TAA xcvrs): 10.06.0130/10.07.0010 S2P30A, S2P31A, S2P32A(C-Class): 10.13.1000 R9X54A/R9X55A (40km BiDi): Not supported	Only the listed 4x4 parts are fully supported: J9150A/J9150D 1990-4391 1990-4175 1990-4635 1990-4634 JL748A (TAA SR) 1990-4175 1990-4776 J9151A/J9151D 1990-4657 1990-4727 1990-4694 J9151E 1990-4727 1990-4694 JL749A (TAA LR) 1990-4751 1990-4752 J9152A/J9152D (or any type of 10G LRM technology) is not supported on the 6200F revision A and B Series
6200F Switch Series	6200F 12p models R8Q72A/R8V13A(TAA)	J9150A/J9150D and J9151A/J9151D/J9151E, JL748A/JL749A (TAA xcvrs), J9153A/J9153D: 10.11.1005
6200F Switch Series	6200F models: JL724B through JL728B, S0M81A through S0M90A	J9150A/J9150D and J9151A/J9151D/J9151E, JL748A/JL749A (TAA xcvrs), R9X54A/R9X55A (40km BiDi), J9153A/J9153D: 10.13.0001 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010
6200M Switch Series	All 6200M models	J9150A/J9150D and J9151A/J9151D/J9151E, J9152D (LRM), JL748A/JL749A (TAA xcvrs), J9153A/J9153D: 10.11.1005 (support for 10G LRM on uplinks) R9X54A/R9X55A (40km BiDi): 10.12.1000 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010	6200M models support all of the above 10G products in addition to: J9152D 10G LRM 1990-4485 1990-4801
6300 Switch Series	All models (M and F) except JL762A	J9150A/J9150D and J9151A/J9151D/J9151E, J9153A/J9153D: 10.04.1000 JL748A/JL749A (TAA xcvrs): 10.06.0130 / 10.07.0005 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1000 R9X54A/R9X55A (40km BiDi): Unsupported, works in UT-mode	J9150A/J9150D 1990-4391 1990-4175 1990-4635 1990-4634 JL748A (TAA SR) 1990-4175 1990-4776 J9151A/J9151D 1990-4657 1990-4727 1990-4694 J9151E 1990-4727 1990-4694 J9153A/J9153D: 1990-4365 1990-4656 JL749A (TAA LR) 1990-4751 1990-4752
6300 Switch Series	JL762A	J9150A/J9150D and J9151A/J9151D/J9151E, J9153A/J9153D: 10.04.3000 JL748A/JL749A (TAA xcvrs): 10.06.0130 / 10.07.0005 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1000
6300 Switch Series (continued)	R8S89A, R8S90A, R8S91A, R8S92A	J9150A/J9150D, J9151A/J9151D, J9151E, J9153A/J9153D, JL748A/JL749A (TAA xcvrs): 10.10.0002 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1000 J9152D are only supported in select ports on 6300M models R8S91A and R8S92A. (Other models in this series do NOT support LRM technology, even in UT-mode). R9X54A/R9X55A (40km BiDi): unsupported, works in UT-mode	J9152D (LRM) 1990-4485 1990-4801 6300M models (R8S91A supports LRM in ports 51 & 52) and (R8S92A supports LRM in ports 1-24) and only J9152D (earlier J9152A are not supported). Other 6300M models not noted above do not support J9152A/J9152D (or any type of 10G LRM technology) even in UT-mode. R8S89A, R8S90A and R8S92A require interface-group 2 speed 10 applicable to the last 2 ports to use 10G (the ports default to 25G use-case). This is different than other 6300 models that auto-detect the inserted transceiver. This may affect Zero-Touch-Provisioning (ZTP) due to a non-factory config. ZTP is OK on these models if 25G optics are used. R8S91A last 2 ports are 10G (LRM capable) and can use 10G optics without issue for ZTP.
	6300M TAA Models: S0F99A, S0G00A, S0G01A, S0G02A (BF airflow), S0G03A, S0G04A, S0G05A, S0G06A 6300F TAA Models: S0G95A, S0G96A, S0G97A, S0G98A	J9150A/J9150D, J9151A/J9151D, J9153A/J9153D, J9151E, JL748A/JL749A (TAA xcvrs), S2P30A, S2P31A, S2P32A(C-Class): 10.14.0001 J9152D (LRM): Not supported in 6300 TAA models No support for LRM technology, even in UT-mode
	S0E91A/S0X44A	J9150A/J9150D, J9151A/J9151D, J9151E, J9153A/J9153D, JL748A/JL749A (TAA xcvrs), S2P30A, S2P31A, S2P32A C-Class): 10.13.1000
	S4P41A, S4P42A, S4P43A, S4P44A	J9150A/J9150D, J9151A/J9151D, J9152D, J9153A/J9153D, J9151E, JL748A/JL749A (TAA xcvrs), S2P30A, S2P31A, S2P32A (C-Class): 10.16.1006	S4P41A/S4P43A: 49-52 S4P42A: 33-40 and 41-44 S4P44A: 25-28 Support is extended to respective TAA SKUs. J9152D (LRM) module is only supported in ports 33-40 of S4P42A/S4P46A SKUs. Not supported on other SKUs.
6300L Switch Series	S3L75A, S3L76A, S3L77A	J9150A/J9150D and J9151A/J9151D/J9151E, J9153D, JL748A/JL749A (TAA xcvrs),S2P30A, S2P31A, S2P32A (C -Class): 10.14.0001 J9152D: 10.14.0001(only S3L77A 6300L model) R9X54A/R9X55A (40km BiDi): Not supported	S3L75A: Ports 25-28 S3L76A: Ports 49-52 S3L77A: Ports 49-50 (not 51-52) S3L77A: Ports 51-52 add support for J9152D (10G LRM) 1990-4485 1990-4801
6400 modules	R0X39B(EOS), R0X40B(EOS), R0X41A(EOS), R0X42A(EOS), R0X43A(*EOS)	J9150A/J9150D and J9151A/J9151D/J9151E, J9153D: 10.04.1000 JL748A/JL749A (TAA xcvrs): 10.06.0140 and 10.07.0005 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010 J9152A/J9152D (or any typeof 10G LRM technology) is not supported in this series.	R0X38A/R0X39A/R0X40A (revision A) are no longer supported for use in the 6400 modules. J9150A/J9150D 1990-4391 1990-4175 1990-4635 1990-4634 JL748A 1990-4175 1990-4776 J9151A/J9151D 1990-4657 1990-4727 1990-4694 J9151E 1990-4727 1990-4694 J9153A/J9153D 1990-4365 1990-4656 JL749A 1990-4751 1990-4752 J9152A/J9152D (or any type of 10G LRM technology) is not supported in any of the 6400 modules. R0X44A auto-detects the inserted type of transceiver; it does NOT require any interface groups like the 8325. R9X54A/R9X55A (10G 40km BiDi) only supported for use on the R0X44C module, not in any other SFP56 port on other modules.
	R0X39C, R0X40C, R0X41C, R0X42C, R0X43C	J9150A/J9150D and J9151A/J9151D/J9151E, J9153D: 10.09.1000 JL748A/JL749A (TAA xcvrs): S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010
	R0X44A (48p 25G v1)	J9150A/J9150D and J9151A/J9151D/J9151E, J9153A/J9153D: 10.04.2000 JL748A/JL749A (TAA xcvrs): 10.06.0140 and 10.07.0005 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010
	R0X44C (48p 25G v2)	J9150A/J9150D and J9151A/J9151D/J9151E, J9153D, JL748A, JL749A (TAA xcvrs): 10.09.1000 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010 R9X54A/R9X55A (10G 40km BiDi): 10.11.0001 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series
	S1T83A S0E48A (32p 25G 4p 100G)	J9150A/J9150D and J9151A/J9151D/J9151E, J9153D, JL748A, JL749A (TAA xcvrs): 10.13.1000 R9X54A/R9X55A (10G 40km BiDi): 10.13.1000 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series	Interface groups must be enabled to change to 10G or 1G capability (DACs or Optics). When set, only 10G optics can be used in the selected port group. S0E48A port groups are as follows: Group 1 = 1-8 Group 2 = 9-16 Group 3 = 17-24 Group 4 = 25-32
6600 Switch Series*	J9264A, J9265A	J9150A and J9151A: K.14.03 J9153A: K.15.02.0004
6600 Switch Series*	J9452A	J9150A and J9151A: K.14.24 J9153A: K.15.02.0004
8100 Switch Series	All models	J9150D, J9151E, (SR/LR) JL748A, JL749A (TAA xcvrs): 10.12.000x J9153E (ER): Not supported (in SFP+ ports); Supported when used through a QSA28 in the QSFP28 ports (10.15.000x) S2P30A, S2P31A (C-Class): 10.13.1010 S2P32A (C-Class ER): Not supported (in SFP+ ports); Supported when used through a QSA28 in the QSFP28 ports (10.15.000x) J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series QSFP28 ports can support 10G SR. LR and ER optical products through a QSA28	J9152A/J9152D (or any type of 10G LRM technology) is not supported on this series (even under UT-mode)
8200zl Switch Series*EOS	J9309A	J9150A/ J9150D and J9151A/9151D: K.14.03 J9153A/J9153D: K.15.02.0004	The J9309A four port SFP⁠+ module only supports 10G transceivers.
8200zl Switch Series*EOS	J9538A, J9548A, J9536A	J9150A/ J9150D, J9151A/9151D, J9153A/J9153D: K.15.02.0004	10G ER (J9153A/D) transceivers are limited to a maximum of two transceivers per J9309A or J9538A modules when used in a 5400zl or 8200zl chassis.
8320 Switch Series	JL479A, JL579A, JL581A	J9150A/J9150D and J9151A/J9151D/J9151E, J9153A/J9153D: 10.03.0001 JL748A/JL749A (TAA xcvrs): 10.06.0140 and 10.07.0005 S2P30A, S2P31A, S2P32A(C-Class): 10.13.1010 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series QSFP28 ports can support these optical products through a QSA28	Only the listed 4x4 parts are fully supported. J9150A/J9150D 1990-4391 1990-4175 1990-4635 1990-4634 JL748A 1990-4175 1990-4776 J9151A/J9151D 1990-4657 1990-4727 1990-4694 J9151E 1990-4727 1990-4694 J9153A/J9153D 1990-4365 1990-4656 JL749A 1990-4751 1990-4752 J9152A/J9152D (or any type of 10G LRM technology) is not supported on the 8320 Series.
8325 Switch Series	Aruba 8325 32C models JL636A displayed by CLI (show system) JL626A - Port-to-Power model (FB) JL627A - Power-to-Port model (BF)	J9150A/J9150D, J9151A/J9151D/J9151E, J9153A/J9153D: 10.07.0010 JL748A/JL749A (TAA xcvrs): 10.07.0010 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series S2P30A, S2P31A, S2P32A (C-Class): 10.07.0010	QSFP28 ports support these optical products through a QSA28 adapter.
	Aruba 8325 48Y8C models JL635A displayed by CLI (show system) JL624A - Port-to- Power model (FB) JL625A - Power-to-Port model (BF)	J9150A/J9150D, J9151A/J9151D/J9151E, J9153A/J9153D: 10.03.0030 JL748A/JL749A (TAA xcvrs): 10.06.0140 and 10.07.0005 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010	QSFP28 ports support these optical products through a QSA28 adapter. Only the listed 4x4 parts are fully supported. J9150A/J9150D 1990-4391 1990-4175 1990-4635 1990-4634 JL748A 4x4: 1990-4175 1990-4776 8325 is only compatible with J9151E or later. Do not attempt to use J9151D or earlier (unless your 4x4 is one of the following): J9151E 1990-4727 1990-4694 J9153A/J9153D 1990-4365 1990-4656 JL749A 4x4: 1990-4751 1990-4752 J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 8325 switches even under UT-mode. The 8325 requires configuration of interface groups (groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). See the Hardware Guides for details.
	Aruba 8325P models 32C models S4A48A displayed by CLI (show system) S0G12A displayed by CLI (show system) for TAA bundles S4A49A/S0G07A(TAA) - 8325P 32C FB 6Fs DC PSU Bdl S4A50A/S0G08A(TAA) - 8325P 32C BF 6Fs DC PSU Bdl S4A51A/S0G09A(TAA) - 8325P 32C FB 6Fs AC PSU Bdl S4A52A/S0G10A(TAA) - 8325P 32C BF 6Fs AC PSU Bdl	J9150A/J9150D, J9151A/J9151D/J9151E, J9153A/J9153D: 10.03.0030 JL748A/JL749A (TAA xcvrs): 10.06.0140 and 10.07.0005 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010	QSFP28 ports support these optical products through a QSA28 adapter. Products that are not listed are not supported. Transceivers may be enabled using UT-mode, however a QSA28 must be used.
	Aruba 8325H models TAA/Non-TAA: S2T42A/S4B20A - 18Y4C model (FB) S2T46A/S4B21A -18Y4C model (BF) S2T47A/S4B22A -16C model (FB) S2T48A/S4B23A -16C model (FB)	J9150A/J9150D, J9151A/J9151D/J9151E, J9153A/J9153D: 10.15.1001 JL748A/JL749A (TAA xcvrs): 10.06.0140 and 10.15.1001 R9X54A, R9X55A (10G 40 km BiDi): 10.15.1001 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series S2P30A, S2P31A, S2P32A (C-Class): 10.15.1001	QSFP28 ports support these optical products through a QSA28 adapter.
8360 Switch Series	8360 32Y4C models JL717A/JL717C(v2) displayed by CLI (show system) JL700A/JL700C(v2) Port-to-Power model JL701A/JL701C(v2) Power-to-Port model 8360 16Y2C models JL718A/JL718C(v2) displayed by CLI (show system) JL702A/JL702C(v2) Port-to-Power model JL703A/JL703C(v2) Power-to-Port model 8360 24XF2C models JL722A displayed by CLI (show system) JL710A/JL710C(v2) Port-to-Power model JL711A/JL711C(v2) Power-to-Port model	J9150A/J9150D, J9151A/J9151D/J9151E, J9153A/J9153D: 10.06.0001 JL748A/JL749A (TAA xcvrs): 10.06.0140 and 10.07.0005 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010 R9X54A/R9X55A(40km BiDi): 10.15.1000 only supported through a QSA28; if used in the 25G ports, CLI will show as unsupported. J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series	QSFP28 ports support these optical products through a QSA28 adapter. Only the listed 4x4 parts are fully supported J9150A/J9150D 1990-4391 1990-4175 1990-4635 1990-4634 JL748A 1990-4175 1990-4776 J9151A/J9151D 1990-4657 1990-4727 1990-4694 J9151E 1990-4727 1990-4694 J9153A/J9153D 1990-4365 1990-4656 JL749A 1990-4751 1990-4752 J9152A/J9152D (or any type of 10G LRM technology) is not supported on this series. The 8360 32Y4C model requires configuration of interface groups only for ports 1-4 (as group number 1) to enable the use of 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). All other ports can individually auto-detect the speed of the inserted xcvr. Not applicable to the 24XF (1G/10G) model. See the Hardware Guides for details.
	8360 48Y6C models JL719C displayed by CLI (show system) JL704C(v2) - Port-to-Power model (FB) JL705C(v2) - Power-to-Port model (BF)	J9150A/J9150D, J9151A/J9151D/J9151E, J9153A/J9153D: 10.09.0002 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010 R9X54A/R9X55A(40km BiDi): 10.15.1000 only supported through a QSA28; if used in the 25G ports, CLI will show as unsupported. J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series.
8400X modules	JL363A	J9150A/J9150D and J9151A/J9151D/J9151E, J9152A/J9152D, J9153A/J9153D: 10.00.0001 10G LRM technology is supported only on the JL363A module JL748A/JL749A (TAA xcvrs): 10.06.0140 and 10.07.0005 JL748A/JL749A (TAA xcvrs): 10.07.0005 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010	Only the listed 4x4 parts are fully supported. J9150A/J9150D 1990-4391 1990-4175 1990-4635 1990-4634 JL748A 1990-4175 1990-4776 J9151E 1990-4727 1990-4694 JL749A 1990-4751 1990-4752 JL363A module supports J9152A/J9152D 1990-4485 1990-4801 JL687A module does NOT support J9152A/J9152D (or any type of 10G LRM technology). The JL687A module requires configuration of interface groups (groups of four ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). See the Hardware Guides for details.
	JL687A	J9150A/J9150D and J9151A/J9151D/J9151E, J9153A/J9153D: 10.04.2000 JL748A/JL749A (TAA xcvrs): 10.06.0140 and 10.07.0005 S2P30A, S2P31A, S2P32A (C-Class): 10.13.1010 J9152A/J9152D (or any type of 10G LRM technology) is not supported in the JL687A module
9300 Switch Series	R8Z96A displayed by CLI show system R9A29A FB airflow R9A30A BF airflow	For use through a QSA28 adapter: J9150A/J9150D, J9151A/J9151D/J9151E, J9153D: 10.14.1000 S2P30A, S2P31A, S2P32A (C-Class): 10.15.1000 R9X54A/R9X55A (BiDi), JL782A/JL783A (TAA) : 10.16.1006 In ports 33-34: J9150A/J9150D, J9151A/J9151D, J9153A/J9153D, JL563B/JL563C (10GBT), R9X54A/R9X55A (BiDi), JL782A/JL783A (TAA), S2P30A, S2P31A, S2P32A (C-Class): 10.16.1006 J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 9300 32D	10G DACs are not supported for use through a QSA28 adapter.
9300S Switch Series	-32C 8D models displayed by CLI (show system) Base models: S0F95A-TAA Base, S0F96A-Base S0F81A FB TAA S0F82A FB S0F83A BF TAA S0F84A BF S0F87A BF DC TAA S0F88A BF DC	For use through a QSA28 adapter: J9150A/J9150D, J9151A/J9151D/J9151E, J9153D: 10.14.0001 S2P30A, S2P31A, S2P32A (C-Class): 10.15.1000 J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 9300S
10000 48Y6C models	R8S96A displayed by CLI (show system) R8P13A - 48Y6C FB bundle R8P14A - 48Y6C BF bundle TAA models: S4K80A displayed by CLI (show system) S0F97A - 48Y6C FB bundle S0F98A - 48Y6C BF bundle	All 10000 models: J9150D, J9153D, J9151E, JL748A (TAA): 10.10.0002 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series S2P30A, S2P31A, S2P32A (C-Class): 10.17.0001 J9150D can also be used through a QSA28 adapter Other 10G xcvrs are not supported through a QSA28. J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 10000	Only the listed 4x4 parts are fully supported J9150A/J9150D 1990-4391 1990-4175 1990-4635 1990-4634 J9151D is not supported: J9151E: 1990-4727 1990-4694 The 10000 series requires configuration of interface groups (groups of 4 ports) to enable the use of 1G or 10G transceivers/DACs in the SFP28 ports (set speed to 25G for the default). See the Hardware Guides for details.
10040 32C6D models	S4R58A displayed by CLI (show system) S4R54A – 32C6D FB bundle S4R55A – 32C6D BF bundle TAA models: S4R59A displayed by CLI (show system) S4R56A – 32C6D FB bundle S4R57A – 32C6D BF bundle	J9150D(SR)/JL748A (TAA), J9151E (LR) /JL749A (TAA), J9153D (ER), S2P30A, S2P31A, S2P32A (C-Class): 10.16.10xx J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series.	The products listed are supported through a QSA28. They are also supported for use in the low-speed ports, 39-40.

*J9152D 10G LRM with part numbers 1990-4485 and 1990-4801 are tuned so that it does not require the use of a mode conditioning patch (MCP) cable. Using an MCP with a J9152D will reduce the light levels and may trigger an "Rx power low" alarm. Older J9152A with part numbers other than 1990-4485 or 1990-4801 may require an MCP when you use OM1 or OM2 fiber cables. Never use mode-conditioning patch cables for OM3 or OM4 fiber types. For more information about mode conditioning patch cables, see related parts in the IEEE 802.3 standard.