Configuring IoT SES Imagotag

The SES Imagotag parameters can be created for an AP group with APs running AOS-8. To configure SES Imagotag, complete the following procedure:

1. In the WebUI, set the filter to an AOS-8 AP group.
2. Under Manage, click Devices.
3. Click the Config icon.
4. Click Show Advanced.
5. Click IoT tab.
6. Expand SES Imagotag.
7. Configure the following parameters and click Save Settings.

Table 1: SES Imagotag Parameters

Parameter	Description
SES Imagotag server name or IP	Name or IP address of SES Imagotag server. NOTE: Name can have up to 127 characters.
SES Imagotag channel	Channel to use when communicating with SES Imagotag server.
SES Imagotag authentication	Enable authentication with SES Imagotag server.
SES Imagotag FQDN verify	Enable FQDN Fully Qualified Domain Name. FQDN is a complete domain name that identifies a computer or host on the Internet. check of SES Imagotag server.