Legal Disclaimer: The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.arubanetworks.com for current and complete HPE Aruba Networking product lines and names.
The Intra VLAN Virtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. Traffic Allowlist is a global allowlist for all WLAN Wireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. SSIDs Service Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. and wired networks configured with the network. For servers to serve the network, you must add them to the Intra VLAN Traffic Allowlist using their IP or MAC Media Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address. When you configure wired servers with their IP address or MAC address, the Instant Access Point (IAP) allows client traffic to the destination MAC addresses.
Configuring a Wired Server with the IP Address
Configuring a wired server with the IP address enables the IAP to allow client traffic to destination. To configure a wired server with the IP address, complete the following steps:
- In the WebUI, set the filter to a group containing at least one AP.
The dashboard context for the group is displayed.
- Under , click > .
A list of APs is displayed in the view.
- Click the icon.
The tabs to configure the APs are displayed.
- Click .
- Click the tab.
The Security page is displayed.
- Click the accordion.
- In the window, click and enter the IP address of the server.
- Click OK.
- Click .
To edit a wired server, select the IP address of the wired server in the window, and then click the edit icon.
To delete a wired server, select the IP address of the wired server in the window, and then click the delete icon.
Configuring a Wired Server with the MAC Address
To configure a wired server with the MAC address, complete the following steps:
- In the WebUI, set the filter to a group containing at least one AP.
The dashboard context for the group is displayed.
- Under , click > .
A list of APs is displayed in the view.
- Click the icon.
The tabs to configure the APs are displayed.
- Click .
- Click the tab.
The Security page is displayed.
- Click the accordion.
- In the window, click and enter the MAC address of the server.
- Click OK.
- Click .
To edit a wired server, select the IP address of the wired server in the window, and then click the edit icon.
To delete a wired server, select the IP address of the wired server in the window, and then click the delete icon.
The following figure shows the configuration options of a wired server with the IP address or MAC address:
Figure 1 Intra VLAN Traffic Allowlist Configuration
