Allowing an AirGroup Service on a VLAN at the Global Level

Ensure that the following AirGroup pre-requisite(s) is(are) met:

• An AOS-10 group should be available.

To allow an AirGroup service on a VLAN Virtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. at the global level, complete the following procedure:

1. In the Classic Central app, set the filter to global.
2. Under Manage, click Applications > AirGroup.
3. Click the Config icon.
4. In the Services table, hover over the required AirGroup service, and click .
5. To allow the service on the required VLANs, select Allow service from the on these VLANs drop-down list.

   Allowing an AirGroup service on VLANs is optional. If configured, the AirGroup service is available on the specified VLANs.

6. Specify the VLANs on which the service must be allowed in VLANs.
7. Click Save.