View Configuration Status for Devices at the Group Level (UI-based Configuration Mode)

When you select a UI group, the Configuration Audit page displays the following information:

Table 1: Configuration Audit Status for a UI Group
Data Pane Content	Description
Configuration Status	Displays the number of devices with configuration sync errors for the selected UI group. To view the configuration sync errors, click View Details. The Configuration Sync Issues window is displayed with the following tabs: Not In Sync Configuration—Displays the configuration changes that are not synched with the switch. Device Running Configuration—Displays the running configuration on the switch. To resolve the configuration sync errors, click Re-Sync Configuration. Classic Central will attempt to synchronize the configuration with the switch or access point again. Click Yes in the confirmation window. To check whether the configuration was synchronized and pushed to the switch or access point, see the Audit Trail page.
Local Overrides	Displays the number of devices with local overrides. To view a complete list of overrides, click Manage Local Overrides. The Local Overrides window is displayed. The overrides are grouped based on the features that are configured in the UI and are displayed as drop-down sections. For example, all overrides for IGMP Internet Group Management Protocol. Communications protocol used by hosts and adjacent routers on IP networks to establish multicast group memberships. are listed under a separate drop-down with the heading IGMP. To preserve the override, click Close. To remove the overrides, select the group name with local override, type REMOVE in the text box and then click OK.
All Devices	The All Devices table provides the following device information for the selected group: MAC Address—MAC Media Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the device. Name—The name of the device. IP Address—IP address of the device. Site—Name of the site to which the device is assigned. Type—The type of the device. Auto Commit—The status of the auto commit state for all the devices within the group. Config Sync/Config Status—Indicator showing configuration sync errors. Local Override—Indicator showing configuration overrides for the devices deployed in the UI groups. NOTE: The MAC Address, IP Address, Site, and Config Status columns are available only for groups in which HPE Aruba Networking gateways are provisioned (Manage > Device > Gateways, click the Config icon. The gateway configuration page is displayed. Navigate to Configuration Audit).