Provisioning Gateways

Classic Central offers the following options to configure gateways in Classic Central:

Groups—You can create a logical subset of devices as groups. If you have devices that must share common configuration settings, ensure that you assign these devices to the same group. Any new device joining a group inherits the configuration that is already applied to the devices in a group. Similarly, you can also maintain separate groups for Branch Gateways and VPNCs by assigning a group role for the devices. For more information, see Assign Gateways to a Group.
Device-specific configuration—If you have a considerably lesser number of devices that do not have the same configuration requirements, you can apply configuration changes at the device level. In some cases, although the devices are assigned to a group, you may want to have a slightly different configuration to one specific device in a group. In such cases, you can modify the device configuration and apply changes at the device level. Classic Central marks the discrepancies in the group and device configuration as overrides on the Configuring Configuration Audit Properties page.
Bulk configuration—Classic Central supports several bulk configuration options for Gateways:
- Bulk Configuration Upload—Allows you to download a list of HPE Aruba Networking Gateways from Classic Central in the CSV Comma-Separated Values. A file format that stores tabular data in the plain text format separated by commas. file format. You can add the configuration parameters for hostname, system IP address, VLAN Virtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN., and Ports, and then upload the CSV file to Classic Central. For more information, see Uploading Bulk Configuration Template.
- Gateway Pools—Allows you to create a common pool of IP addresses and enables automatic assignment of IP addresses to Gateways. For more information, see Configuring Gateway Pools for Gateways.
- DHCP Dynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network. Pools—Allows you to configure a DHCP pool, using which Classic Central automatically assigns a subnet Subnet is the logical division of an IP network. to each Gateway for a given VLAN. For more information, see Configuring Gateway Pools for Gateways.
APIs—Allows you to configure and monitor devices using NB APIs Application Programming Interface. Refers to a set of functions, procedures, protocols, and tools that enable users to build application software.. For more information, see API Gateway.

Classic Central supports the following methods to configure AOS-10 Gateway groups and Gateways.

Guided Setup—You can use the Guided Setup to quickly configure basic and essential parameters on AOS-10 Gateways for deploying the SD-WAN Software-Defined Wide Area Network. SD-WAN is an application for applying SDN technology to WAN connections that connect enterprise networks across disparate geographical locations. solution. The Guided Setup provides a wizard-based workflow for provisioning AOS-10 Gateways. The wizard allows you to configure AOS-10 Gateways at your own pace, pause, and resume when required. However, the Guided Setup will not be available after you complete the provisioning workflow for an AOS-10 Gateway group or an AOS-10 Gateway.
For more information on configuring AOS-10 Gateways using the Guided Setup, see the following topics:
Basic Mode—Allows you to configure your AOS-10 Gateways in a non-linear fashion. This mode allows you to make configuration changes after you provision your AOS-10 gateways for the first time using a Guided setup. For more information, see Configuring an SD-Branch Network Using the Basic Setup for AOS-10 Personas.
Figure 1 Basic Mode
Advanced Mode—Allows you to configure advanced features for SD-WAN Wide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. deployments. For more information, see Configuring an SD-Branch Network Using the Advanced Setup for AOS-10 Personas.
Figure 2 Advanced Mode
Before you proceed with the configuration tasks, browse through the recommendations and best practices described in the SD-Branch Fundamentals Guide and SD-Branch Security Hardening Guide.