Intra VLAN Traffic Allowlist

The Intra VLAN Virtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. Traffic Allowlist is a global allowlist for all wired networks and WLAN Wireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. SSIDs Service Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. configured with the feature. For servers to serve the network, you must add them to Intra VLAN Traffic Allowlist using their IP or MAC Media Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address. When you configure wired servers with their IP address or MAC address, the AP allows client traffic to the destination MAC addresses.

This section includes the following topics:

• Configuring a Wired Server with the IP Address

• Configuring a Wired Server with the MAC Address

Configuring a Wired Server with the IP Address

To configure a wired server with the IP address, complete the following steps:

1. In the WebUI, set the filter to a group that contains at least one AP.
   The dashboard context for the group is displayed.
2. Under Manage, click Devices > Access Points.
3. Click the Config icon.
   The tabs to configure APs are displayed.
4. Click Show Advanced, and click the Security tab.
   The Security details page is displayed.
5. Click the Intra VLAN Traffic Allowlist accordion.
6. In the Wired Server IP window, click + and enter the IP address of the server.
7. Click OK.
8. Click Save Settings.

Configuring a Wired Server with the MAC Address

To configure a wired server with the MAC address, complete the following steps:

1. In the WebUI, set the filter to a group that contains at least one AP.
   The dashboard context for the group is displayed.
2. Under Manage, click Devices > Access Points.
3. Click the Config icon.
   The tabs to configure APs are displayed.
4. Click Show Advanced, and click the Security tab.
   The Security details page is displayed.
5. Click the Intra VLAN Traffic Allowlist accordion.
6. In the Wired Server MAC window, click + and enter the MAC address of the server.
7. Click OK.
8. Click Save Settings.