Adding VLANs for Gateways

Complete the following steps to add VLANs Virtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. to the HPE Aruba Networking Gateway and configure the VLAN parameters.

1. To configure a gateway group or gateway, complete either one of these steps:

• To select a gateway group:

  1. In the Classic Central app, set the filter to a group that contains at least one Branch Gateway.

     The dashboard context for a group is displayed.
     

  2. Under Manage, click Devices > Gateways.

     A list of gateways is displayed in the List view.

  3. Click Config.

     The configuration page is displayed for the selected group.

• To select a gateway:

  1. In the Classic Central app, set the filter to Global or a group that contains at least one Branch Gateway.

  2. Under Manage, click Devices > Gateways.

     A list of gateways is displayed in the List view.
     

  3. Click a gateway under Device Name.

     The dashboard context for the gateway is displayed.

  4. Under Manage, click Device.

     The gateway device configuration page is displayed.

2. If you are in the Basic Mode, click Advanced Mode to access the advanced configuration options.

3. Click Interface > VLANs.

4. Click + from the VLANs table to add a VLAN interface.

5. In the New VLAN window, specify the following parameters and save the changes:

   • VLAN name

   • VLAN ID/Range

6. Click Save.

This animation will help you to add VLANs to the HPE Aruba Networking Gateway and configure the port parameters.