Associating an Overlay Network Segment

To configure an overlay network configuration, complete the following steps:

1. In the WebUI, do either of the following:
   • To configure a Branch Gateway group, complete the following steps:
     1. Set the filter to a group containing Branch Gateways or VPNCs.

        The dashboard context for a group is displayed.

     2. Click Gateways.
     3. Click the Config icon to view the Branch Gateway group configuration dashboard.
   • To configure a Branch Gateway, complete the following steps:
     1. Set the filter to Global or a group containing at least one Branch Gateway.
     2. Under Manage, click Devices > Gateways.

        A list of gateways is displayed in the List view.

     3. Click a gateway under Gateways.

        The dashboard context for the gateway is displayed.

     4. Under Manage, click Device.

        The gateway device configuration page is displayed.

2. If you are in the Basic Mode, click Advanced Mode to access the advanced configuration options.
3. Click VPN > Network Segments. The Network Segments configuration page is displayed.
4. All the Network Segments created under Network Services dashboard are displayed in the device or group Network Segments tab.
5. Click the segment for which you want to associate VLANs Virtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..
6. Select the VLANs from the drop-down list.
7. Click Save Settings.