9004-LTE Branch Gateway

What Are the Different Models of HPE Aruba Networking 9004-LTE Gateway?

The 9004-LTE Long Term Evolution. LTE is a 4G wireless communication standard that provides high-speed wireless communication for mobile phones and data terminals. See 4G. Gateway is available in the following two models:

Does the 9004-LTE Gateway Have an Integrated LTE Modem?

Yes, the 9004-LTE Gateways have an advanced Global Category 12 integrated 4G Fourth Generation of Wireless Mobile Telecommunications Technology. See LTE. LTE module.

Where Can I Find the IMEI Information for the 9004-LTE Gateway?

The IMEI information is available on the back of the unit, on the packaging box, and on the shipping carton. If One Touch provisioning (OTP) is required, you could also use CLI.

What Type of SIM Cards Does the 9004-LTE Gateway Support?

The 9004-LTE Gateway supports two nano-SIM Subscriber Identity Module. SIM is an integrated circuit that is intended to securely store the International Mobile Subscriber Identity (IMSI) number and its related key, which are used for identifying and authenticating subscribers on mobile telephony devices. cards which can be configured to work with different cellular providers.

Can I Insert, Remove, or Swap SIM card(s) without Powering down the 9004-LTE Gateway?

Yes, you can insert, remove, or swap SIM card(s) without powering down the gateway. You must wait till the mobile network connection is initialized and established to pass the traffic.

Can I Have Two Simultaneous LTE Connections from the 9004-LTE Gateway?

Even though the 9004-LTE Gateway supports two SIM cards, only one SIM card can be active at a time. The gateway has only one set of radios.

Can I Use Two SIM Cards to Automatically Failover If the LTE Connection Fails or Goes down?

Currently, automatic failover between the two SIM cards is not supported. You must manually configure the switch over.

Does HPE Aruba Networking Support ZTP with 9004-LTE Internal Module?

Yes, HPE Aruba Networking supports ZTP Zero Touch Provisioning. ZTP is a device provisioning mechanism that allows automatic and quick provisioning of devices with a minimal or at times no manual intervention. by using an LTE connection on the 9004-LTE Gateway to Onboard the gateway, provided you use an active SIM card.

What Accessories Does the 9004-LTE Gateway Support for Improving Cellular Reception?

You can install additional accessories, such as indoor and outdoor antennas, for improving the cellular reception of the 9004-LTE Gateway. These accessories extend the device functionalities.

Does the 9004-LTE Gateway Support GPS Functionality?

Yes, the 9004-LTE Gateway has built-in GPS Global Positioning System. A satellite-based global navigation system. functionality which is enabled by default. The GPS coordinates are sent to HPE Aruba Networking Central and can be viewed in the Navigating to the WAN Summary Tab.

How Can I Improve the Accuracy of the GPS Module?

The GPS connection requires an external antenna which is not shipped with the product. The spare indoor antenna SKU Stock Keeping Unit. SKU refers to the product and service identification code for the products in the inventory. R4Y94A can be ordered. In addition, you can use an antenna extender kit if you are installing the device indoors, where reception is not optimal.

Can I Use a Supported External USB LTE Dongle on the 9004-LTE Gateway?

The 9004-LTE gateway does not support an external USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  dongle.

Where Can I Find More Information about the 9004-LTE Gateway Hardware?

For a detailed overview of the physical and performance characteristics of the 9004-LTE Gateway and the procedure to install the Gateway and its accessories, see the HPE Aruba Networking 9004-LTE Gateway Installation Guide.